PACKAGES.TXT; Sun Apr 10 22:52:19 CEST 2011 This file provides details on the packages found on this site Total size of all packages (compressed) : 292 MB Total size of all packages (uncompressed) : 1607 MB PACKAGE NAME: libtlc54x-0.1.1-i486-1mp.txz PACKAGE LOCATION: ./Categories/Acquire&Measure/libtlc54x/0.1.1 PACKAGE SIZE (compressed): 16 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libtlc54x: LibTLC54x libtlc54x: libtlc54x: libTLC54x is a library to communicate with the Texas Instruments libtlc54x: TLC548/TLC549 8-Bit A/D-Converter via serial or parallel connector. libtlc54x: The library just needs the device to be opened and than you can read libtlc54x: data from the TLC54x. It hides the process of getting the data bit by libtlc54x: bit and also hides the wait states. libtlc54x: PACKAGE NAME: fityk-0.9.7-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/fityk/0.9.7 PACKAGE SIZE (compressed): 1589 K PACKAGE SIZE (uncompressed): 6010 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,bzip2 >= 1.0.6-i486-1_slack13.1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,lua >=5.1.4.2-i486-1mp,ncurses >= 5.7-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,python >= 2.6.4-i486-1,readline >= 5.2-i486-4,util-linux-ng >= 2.17.2-i486-1,wxWidgets >= 2.9.1-i486-1mp,xylib >= 0.8-i486-1mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fityk: Fityk fityk: fityk: Fityk is a program for nonlinear fitting of analytical functions fityk: (especially peak-shaped) to data (usually experimental data). There fityk: are also people using it to remove the baseline from data, or to fityk: display data only. It is reportedly used in crystallography, fityk: chromatography, photoluminescence and photoelectron spectroscopy, fityk: infrared and Raman spectroscopy, to name but a few. fityk: PACKAGE NAME: gaw-20110218-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/gaw/20110218 PACKAGE SIZE (compressed): 604 K PACKAGE SIZE (uncompressed): 5200 K PACKAGE REQUIRED: alsa-lib >= 1.0.23-i486-1,atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gaw: GAW gaw: gaw: Gaw is a tool for displaying analog data files from the output of gaw: simulators or real life recorded and sampled data. Gaw is based on gaw: the Gtk2+ toolkit. gaw: PACKAGE NAME: gerbv-2.5.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/gerbv/2.5.0 PACKAGE SIZE (compressed): 769 K PACKAGE SIZE (uncompressed): 5710 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gerbv: Gerbv gerbv: gerbv: GerbV (GerberViewer) is a viewer for Gerber files; these files are gerbv: generated from PCB CAD system and sent to PCB manufacturers as basis gerbv: for the manufacturing process. The different layers of the PCB are gerbv: separated into different files. Gerbv is a program which can display, gerbv: edit, export, and do other manipulation of file formats used in PCB gerbv: design (RS274X, Excellon drill, and pick-and-place). gerbv: PACKAGE NAME: gspiceui-v0.9.99-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/gspiceui/0.9.99 PACKAGE SIZE (compressed): 520 K PACKAGE SIZE (uncompressed): 1340 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gaw >=20100923-i486-1mp,gcc >= 4.4.4-i486-1,geda-gaf >= 1.6.1-i486-1mp,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gnucap >=2009-12-07-i486-1mp,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,ngspice >= 22-i486-2mp,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,wxWidgets >= 2.8.11-i486-2mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gspiceui: gspiceui: gspiceui: gspiceui: Provides a GUI for two freely available SPICE electronic circuit gspiceui: simulation engines: Gnucap and NGSpice. gspiceui: PACKAGE NAME: gtkwave-3.3.20-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/gtkwave/3.3.20 PACKAGE SIZE (compressed): 1746 K PACKAGE SIZE (uncompressed): 4430 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,bzip2 >= 1.0.6-i486-1_slack13.1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,judy >= 1.0.5-i486-1mp,libX11 >= 1.3.3-i486-1,libXScrnSaver >= 1.2.0-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXft >= 2.1.14-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,tcl >= 8.5.8-i486-1,tk >= 8.5.8-i486-1,xz >= 4.999.9beta-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtkwave: GTKWave gtkwave: gtkwave: GTKWave is a fully featured GTK+ based wave viewer for Unix-GNU/Linux gtkwave: which reads LXT, LXT2, VZT, FST, and GHW files as well as standard gtkwave: Verilog VCD/EVCD files and allows their viewing. gtkwave: PACKAGE NAME: HantekDSO-0.5.4-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/hantekdso/0.5.4 PACKAGE SIZE (compressed): 85 K PACKAGE SIZE (uncompressed): 540 K PACKAGE REQUIRED: automake >= 1.10.3-noarch-1mp,binutils >= 2.20.51.0.8-i486-1,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3,kdelibs3 >= 3.5.10-i486-opt1,lcms >= 1.19-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXft >= 2.1.14-i486-1,libXinerama >= 1.1-i486-1,libXmu >= 1.0.5-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libXxf86vm >= 1.1.0-i486-1,libart_lgpl >= 2.3.20-i486-1,libdrm >= 2.4.20-i486-1,libidn >= 1.5-i486-1,libjpeg >= v8a-i486-1,libmng >= 1.0.10-i486-2,libpng >= 1.4.3-i486-1_slack13.1,libusb >= 1.0.6-i486-1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,qt3 >= 3.3.8b-i486-opt1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: HantekDSO: HantekDSO HantekDSO: HantekDSO: Hantek DSO-2150 software (Voltcraft/Darkwire/Protek/Acetech etc HantekDSO: DSO-2090/2150/2250/5200A etc) HantekDSO: HantekDSO: HantekDSO: PACKAGE NAME: openhantek-0.2.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/openhantek/0.2.0 PACKAGE SIZE (compressed): 155 K PACKAGE SIZE (uncompressed): 530 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fftw >= 3.2.2-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libusb >= 1.0.6-i486-1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,qt >= 4.6.2_2d3d3e5-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openhantek: OpenHantek openhantek: openhantek: OpenHantek is a free software for Hantek (Voltcraft - Darkwire - openhantek: Protek/Acetech) USB DSOs based on HantekDSO. The UI is written in openhantek: C++/Qt 4 and uses OpenGL to draw the graphs. OpenHantek has started as openhantek: an alternative to the official Hantek DSO software for Linux users. openhantek: PACKAGE NAME: oscope2100-1.1.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/oscope2100/1.1.0 PACKAGE SIZE (compressed): 45 K PACKAGE SIZE (uncompressed): 150 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libusb >= 1.0.6-i486-1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: oscope2100: Oscope2100 oscope2100: oscope2100: "Oscope 2100" is an oscilloscope software for Hantek DSO-2100 USB oscope2100: oscilloscope. It is based on libusb and GTK libraries. Project does oscope2100: not include firmware extraction utility called "dsoextractfw". oscope2100: Please read file README in this package for utility "dsoextractfw". oscope2100: PACKAGE NAME: lyx-1.6.9-i486-1mp.txz PACKAGE LOCATION: ./Categories/Authoring/lyx/1.6.9 PACKAGE SIZE (compressed): 7868 K PACKAGE SIZE (uncompressed): 43480 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,enchant >= 1.5.0-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,qt >= 4.6.2_2d3d3e5-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lyx: LyX lyx: lyx: LyX is a document processor that encourages an approach to writing lyx: based on the structure of your documents (WYSIWYM) and not simply lyx: their appearance (WYSIWYG). LyX combines the power and flexibility of lyx: TeX/LaTeX with the ease of use of a graphical interface. This results lyx: in world-class support for creation of mathematical content (via a lyx: fully integrated equation editor) and structured documents like lyx: academic articles, theses, and books. lyx: PACKAGE NAME: usbpicprog-0.4.2beta-i486-1mp.txz PACKAGE LOCATION: ./Categories/IDE/usbpicprog/0.4.2beta PACKAGE SIZE (compressed): 640 K PACKAGE SIZE (uncompressed): 6390 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libusb >= 1.0.6-i486-1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,wxWidgets >= 2.9.1-i486-1mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: usbpicprog: USBPicProg usbpicprog: usbpicprog: usbpicprog, a free and open source Microchip PIC programmer for the usbpicprog: USB port. usbpicprog: PACKAGE NAME: gnucap-2009-12-07-i486-1mp.txz PACKAGE LOCATION: ./Categories/Simulation/gnucap/20091207 PACKAGE SIZE (compressed): 619 K PACKAGE SIZE (uncompressed): 2700 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,libtermcap >= 1.2.3-i486-7,readline >= 5.2-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnucap: Gnucap - The Gnu Circuit Analysis Package gnucap: gnucap: The primary component is a general purpose circuit simulator. It gnucap: performs nonlinear dc and transient analyses, fourier analysis, and gnucap: ac analysis. Spice compatible models for the MOSFET (level 1-8), BJT, gnucap: and diode are included in this release. gnucap: Gnucap is not based on Spice, but some of the models have been gnucap: derived from the Berkeley models. gnucap: PACKAGE NAME: gnusim8085-1.3.7-i486-1mp.txz PACKAGE LOCATION: ./Categories/Simulation/gnusim8085/1.3.7 PACKAGE SIZE (compressed): 108 K PACKAGE SIZE (uncompressed): 760 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,gtksourceview >= 2.11.2-i486-1mp,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,libxml2 >= 2.7.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnusim8085: GNUSim8085 (GNU Simulator 8085) gnusim8085: gnusim8085: GNUSim8085 is a graphical simulator, assembler and debugger for gnusim8085: the Intel 8085 microprocessor gnusim8085: PACKAGE NAME: gpsim-0.25.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/Simulation/gpsim/0.25.0 PACKAGE SIZE (compressed): 2114 K PACKAGE SIZE (uncompressed): 12290 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,gputils-0.13.7-i486-1mp,gtk+2 >= 2.18.9-i486-1,gtk+extra >= 2.1.2-i486-1mp,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libtermcap >= 1.2.3-i486-7,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,popt >= 1.7-i486-3,readline >= 5.2-i486-4,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gpsim: gpsim gpsim: gpsim: gpsim is a full-featured software simulator for Microchip(tm) PIC gpsim: microcontrollers distributed under the GNU General Public License gpsim: gpsim has been designed to be as accurate as possible. Accuracy gpsim: includes the entire PIC, from the core to the I/O pins and including gpsim: all of the internal peripherals. Thus it's possible to create stimuli gpsim: and tie them to the I/O pins and test the PIC the same PIC the same gpsim: way you would in the real world. gpsim: PACKAGE NAME: ngspice-22-i486-2mp.txz PACKAGE LOCATION: ./Categories/Simulation/ngspice/22 PACKAGE SIZE (compressed): 1477 K PACKAGE SIZE (uncompressed): 10010 K PACKAGE REQUIRED: elvis >= 2.2_0-i486-2,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXaw >= 1.0.7-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXmu >= 1.0.5-i486-1,libXpm >= 3.5.8-i486-1,libXt >= 1.0.8-i486-1,libxcb >= 1.6-i486-1,ncurses >= 5.7-i486-1,readline >= 5.2-i486-4,util-linux-ng >= 2.17.2-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ngspice: NGSpice-rework ngspice: ngspice: Ngspice is a mixed-level/mixed-signal circuit simulator. Its code is ngspice: based on three open source software packages: Spice3f5, Cider1b1 and ngspice: Xspice. ngspice: PACKAGE NAME: FSMDesigner4-4.2-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/FSMDesigner PACKAGE SIZE (compressed): 913 K PACKAGE SIZE (uncompressed): 2850 K PACKAGE REQUIRED: curl >= 7.20.1-i486-1,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,cyrus-sasl >= 2.1.23-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,icu >= 4.4.1-i486-1mp,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXrender >= 0.9.5-i486-1,libidn >= 1.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,openldap-client >= 2.4.21-i486-1,openssl >= 0.9.8n-i486-1 | openssl-solibs >= 0.9.8n-i486-1,python >= 2.6.4-i486-1,qt >= 4.6.2_2d3d3e5-i486-1,util-linux-ng >= 2.17.2-i486-1,xerces-c >= 3.1.1-i486-1mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: FSMDesigner4: FSMDesigner4 FSMDesigner4: FSMDesigner4: FSMDesigner4 is a C++ based implementation for a Finite State FSMDesigner4: Machine (FSM) design tool with integrated Hardware Description FSMDesigner4: Language (HDL) generation. FSMDesigner4 uses the Simple-Moore FSM FSMDesigner4: model. This guarantees an efficient design for fast complex control FSMDesigner4: circuits. FSMDesigner4: PACKAGE NAME: gcam-2010.07.27-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/gcam/20100727 PACKAGE SIZE (compressed): 268 K PACKAGE SIZE (uncompressed): 1520 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,gtk+2 >= 2.18.9-i486-1,gtkglext >= 1.2.0-i486-1mp,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXmu >= 1.0.5-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gcam: GCAM gcam: gcam: GCAM is the free GNU Computer Aided Manufacturing package. Most gcam: 3-Axis Computer Numerically Controlled (CNC) mills are supported in gcam: both english and metric units. GCAM has a simple interface for making gcam: bolt holes, drill holes, sketches, templates, and more. After gcam: extruding these entities one can export the corresponding G-code for gcam: the selected cutting tool(s). GCAM also imports RS274X (Gerber) and gcam: Excellon drill files for gerber to G-code pcb milling conversion used gcam: in circuit board prototyping. gcam: PACKAGE NAME: geda-gaf-1.6.2-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/geda/1.6.2 PACKAGE SIZE (compressed): 3330 K PACKAGE SIZE (uncompressed): 14070 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gmp >= 5.0.1-i486-1,gtk+2 >= 2.18.9-i486-1,guile >= 1.8.7-i486-3,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libstroke >= 0.5.1-i486-1mp,libtool >= 2.2.6b-i486-2,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,perl >= 5.10.1-i486-1,pixman >= 0.16.6-i486-1,python >= 2.6.4-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: geda-gaf: gEDA geda-gaf: geda-gaf: The gEDA project has produced and continues working on a full GPL'd geda-gaf: suite and toolkit of Electronic Design Automation tools. These tools geda-gaf: are used for electrical circuit design, schematic capture, simulation, geda-gaf: prototyping, and production. Currently, the gEDA project offers a geda-gaf: mature suite of free software applications for electronics design, geda-gaf: including schematic capture, attribute management, bill of materials geda-gaf: (BOM) generation, netlisting into over 20 netlist formats, analog and geda-gaf: digital simulation, and printed circuit board (PCB) layout. geda-gaf: PACKAGE NAME: geda-gaf-1.7.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/geda/1.7.0 PACKAGE SIZE (compressed): 6176 K PACKAGE SIZE (uncompressed): 16990 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gmp >= 5.0.1-i486-1,gtk+2 >= 2.18.9-i486-1,guile >= 1.8.7-i486-3,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libstroke >= 0.5.1-i486-1mp,libtool >= 2.2.6b-i486-2,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,perl >= 5.10.1-i486-1,pixman >= 0.16.6-i486-1,python >= 2.6.4-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: geda-gaf: gEDA geda-gaf: geda-gaf: The gEDA project has produced and continues working on a full GPL'd geda-gaf: suite and toolkit of Electronic Design Automation tools. These tools geda-gaf: are used for electrical circuit design, schematic capture, simulation, geda-gaf: prototyping, and production. Currently, the gEDA project offers a geda-gaf: mature suite of free software applications for electronics design, geda-gaf: including schematic capture, attribute management, bill of materials geda-gaf: (BOM) generation, netlisting into over 20 netlist formats, analog and geda-gaf: digital simulation, and printed circuit board (PCB) layout. geda-gaf: PACKAGE NAME: kicad-20100505-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/kicad/stable-20100505-r2356 PACKAGE SIZE (compressed): 97330 K PACKAGE SIZE (uncompressed): 483710 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,wxWidgets >= 2.8.11-i486-2mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: kicad: KiCAD kicad: kicad: Kicad is an open source (GPL) software for the creation of electronic kicad: schematic diagrams and printed circuit board artwork. kicad: PACKAGE NAME: pcb-20100929-i486-2mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/pcb/20100929 PACKAGE SIZE (compressed): 2609 K PACKAGE SIZE (uncompressed): 15560 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,dbus >= 1.2.24-i486-2,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,gd >= 2.0.35-i486-4,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXpm >= 3.5.8-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libjpeg >= v8a-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pcb: PCB pcb: pcb: PCB is an interactive printed circuit board editor for the X11 window pcb: system. PCB includes a rats nest feature, design rule checking, and pcb: can provide industry standard RS-274-X (Gerber), NC drill, and pcb: centroid data (X-Y data) output for use in the board fabrication and pcb: assembly process. PCB offers high end features such as an autorouter pcb: and trace optimizer which can tremendously reduce layout time. pcb: PACKAGE NAME: qfsm-0.52.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/qfsm/0.52.0 PACKAGE SIZE (compressed): 1064 K PACKAGE SIZE (uncompressed): 4650 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,qt >= 4.6.2_2d3d3e5-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: qfsm: Qfsm qfsm: qfsm: Qfsm is a graphical editor for finite state machines written in C++ qfsm: using Qt the graphical Toolkit from Trolltech. Finite state machines qfsm: are a model to describe complex objects or systems in terms of the qfsm: states they may be in. In practice they can used to design integrated qfsm: circuits or to create regular expressions, scanners or other program qfsm: code. qfsm: PACKAGE NAME: cpik-0.5.2-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/cpik/0.5.2-1 PACKAGE SIZE (compressed): 2055 K PACKAGE SIZE (uncompressed): 5900 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cpik: CPIK cpik: cpik: CPIK (the C compiler for PIC18 devices) is now released under GPL cpik: licence. CPIK V0.5.x is an easy to use, near ANSI C compiler which is cpik: fully integrated with PikDev. This project is still in progress but cpik: the current version is perfectly usable (from Pikdev or from cpik: command-line interpreter). cpik: PACKAGE NAME: flashrom-0.9.3-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/flashrom/0.9.3 PACKAGE SIZE (compressed): 203 K PACKAGE SIZE (uncompressed): 930 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-5_slack13.1,libftdi >= 0.18-i486-1mp,libusb >= 1.0.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: flashrom: FlashROM flashrom: flashrom: Flashrom is a utility for identifying, reading, writing, verifying flashrom: and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/ flashrom: firmware images. flashrom: PACKAGE NAME: ftdi_eeprom-0.3-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/ftdi_eeprom/0.3 PACKAGE SIZE (compressed): 14 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: confuse >= 2.7-i486-1mp,glibc-solibs >= 2.11.1-i486-3,libftdi >= 0.18-i486-1mp,libusb >= 1.0.6-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ftdi_eeprom: FTDI_EEPROM ftdi_eeprom: ftdi_eeprom: Utility to write the EEPROM connected to a FTDI USB-chip ftdi_eeprom: PACKAGE NAME: gputils-0.13.7-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/gputils/0.13.7 PACKAGE SIZE (compressed): 549 K PACKAGE SIZE (uncompressed): 17780 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gputils: GPUtils gputils: gputils: GPUTILS is a collection of tools for the Microchip(TM) PIC gputils: microcontrollers. It includes gpasm, gplink, and gplib. It's gputils: distributed under the terms of the GNU Public License. gputils: PACKAGE NAME: k8061utils-1.1.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/k8061utils/1.1.0 PACKAGE SIZE (compressed): 109 K PACKAGE SIZE (uncompressed): 390 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3,libusb >= 1.0.6-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: k8061utils: K8061 utils k8061utils: k8061utils: K8061 utilities provide multi purpose control of up to 8 k8061 USB k8061utils: interface boards including k8061d (daemon), k8061m (memory client), k8061utils: and k8061s (socket client). It is licensed under the GNU GPL V.3. k8061utils: k8061utils: REMEMBER: after installation type "usermod -aG k8061 " then k8061utils: logout and login user k8061utils: PACKAGE NAME: lxi-control-1.0.1-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/lxi-control/1.0.1 PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lxi-control: LXI-control lxi-control: lxi-control: The lxi-control application is a command line utility for remote lxi-control: controlling LXI enabled devices. Typical devices include instruments lxi-control: such as power supplies, oscilloscopes, digital multimeters, signal lxi-control: generators, etc.. The devices are controlled by sending SCPI commands lxi-control: via LAN IP network to the devices. LXI is the successor to GPIB. lxi-control: PACKAGE NAME: pdb-0.1-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/openprogrammer/pdb/0.1 PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 70 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pdb: pdb - PIC debugger pdb: pdb: Pdb is an ICD (In-Circuit Debugger) for PIC16 microcontrollers. pdb: PACKAGE NAME: pk2-la-1.1-noarch-2mp.txz PACKAGE LOCATION: ./Categories/Utilities/pickit2la/1.1 PACKAGE SIZE (compressed): 19 K PACKAGE SIZE (uncompressed): 90 K PACKAGE REQUIRED: pygtk >= 2.16.0-i486-1,python >= 2.6.4-i486-1,pyusb >= 1.0.0-a1-noarch-1mp PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pk2-la: PK2-la pk2-la: pk2-la: The Microchip PICkit 2 has the ability to act as a logic analyzer pk2-la: and I/O probe. This project provides a reverse engineered libusb pk2-la: user space device driver and GUI to provide this functionality for pk2-la: users of unsupported operating systems. pk2-la: PACKAGE NAME: pikloops-0.2.5-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/pikloops/0.2.5 PACKAGE SIZE (compressed): 46 K PACKAGE SIZE (uncompressed): 170 K PACKAGE REQUIRED: acl >= 2.2.47_1-i486-1,attr >= 2.4.43_1-i486-1,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gamin >= 0.1.10-i486-2,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3,kdelibs3 >= 3.5.10-i486-opt1,lcms >= 1.19-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXft >= 2.1.14-i486-1,libXinerama >= 1.1-i486-1,libXmu >= 1.0.5-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libXxf86vm >= 1.1.0-i486-1,libart_lgpl >= 2.3.20-i486-1,libdrm >= 2.4.20-i486-1,libidn >= 1.5-i486-1,libjpeg >= v8a-i486-1,libmng >= 1.0.10-i486-2,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,qt3 >= 3.3.8b-i486-opt1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pikloops: PikLoops pikloops: pikloops: PikLoops is a simple KDE program used to generate assembly time delays pikloops: for Microchip microcontrolers using Microchip instructions. PikLoops pikloops: is based on a program for Windows, originally created by pikloops: William J. Boucher. Using his calculation formulas we can generate pikloops: accurate assembly language time delay loops. pikloops: PACKAGE NAME: pk2aux-1.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/pk2aux/1.0 PACKAGE SIZE (compressed): 25 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3,libusb >= 1.0.6-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pk2aux: PK2Aux pk2aux: pk2aux: PK2Aux is a library and suite of command-line utilities for using pk2aux: the Microchip PICkit2 programmer device for purposes other than pk2aux: programming (such as the generic pin controls, serial UART, and pk2aux: logic analyzer). pk2aux: PACKAGE NAME: pk2cmd-1.20-i486-2mp.txz PACKAGE LOCATION: ./Categories/Utilities/pk2cmd/1.20 PACKAGE SIZE (compressed): 107 K PACKAGE SIZE (uncompressed): 570 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3,libusb >= 1.0.6-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pk2cmd: PK2CMD pk2cmd: pk2cmd: PICkit 2 Command Line Interface (PK2CMD) is a 32-bit command-line pk2cmd: interface to the PICkit 2 device programmer. pk2cmd: PACKAGE NAME: serial-io-1.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/serial-io/1.0 PACKAGE SIZE (compressed): 133 K PACKAGE SIZE (uncompressed): 520 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libserial >= 0.6.0rc1-i486-1mp,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,qt >= 4.6.2_2d3d3e5-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: serial-io: Serial-IO serial-io: serial-io: Serial-IO-Manager is a simple program to send and receive data from serial-io: a serial interface. The GUI is designed like a chat window with a serial-io: transmitter/receiver textfield and a command line to send char and serial-io: integer values. serial-io: PACKAGE NAME: srecord-1.56-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/srecord/1.56 PACKAGE SIZE (compressed): 507 K PACKAGE SIZE (uncompressed): 3390 K PACKAGE REQUIRED: boost >= 1.38.0-i486-2,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,diffutils >= 2.8.1-i486-3,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3,groff >= 1.20.1-i486-1,libgcrypt >= 1.4.5-i486-2,libgpg-error >= 1.7-i486-2,sharutils >= 4.7-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: srecord: SRecord srecord: srecord: The SRecord package is a collection of powerful tools for manipulating srecord: EPROM load files. It reads and writes numerous EPROM file formats, and srecord: can perform many different manipulations. srecord: PACKAGE NAME: wxMaxima-0.8.7-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/wxMaxima/0.8.7 PACKAGE SIZE (compressed): 535 K PACKAGE SIZE (uncompressed): 2310 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,wxWidgets >= 2.8.11-i486-2mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wxMaxima: WxMaxima wxMaxima: wxMaxima: wxMaxima is a graphical user interface for the computer algebra system wxMaxima: Maxima. It eases the use of Maxima by making most of its commands wxMaxima: available through a menu system and by providing input dialogs for wxMaxima: commands that require more than one argument. It also implements its wxMaxima: own display engine that outputs mathematical symbols directly instead wxMaxima: of depicting them with ASCII characters. wxMaxima also features 2D and wxMaxima: 3D inline plots, simple animations, mixing of text and mathematical wxMaxima: calculations to create documents, exporting of input and output to TeX. wxMaxima: PACKAGE NAME: automake-1.10.3-noarch-1mp.txz PACKAGE LOCATION: ./development/automake/1.10.3 PACKAGE SIZE (compressed): 528 K PACKAGE SIZE (uncompressed): 1640 K PACKAGE REQUIRED: perl >= 5.10.1-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: automake: automake (a Makefile generator) automake: automake: This is Automake, a Makefile generator. It was inspired by the 4.4BSD automake: make and include files, but aims to be portable and to conform to the automake: GNU standards for Makefile variables and targets. Automake is a Perl automake: script. The input files are called Makefile.am. The output files are automake: called Makefile.in; they are intended for use with Autoconf. Automake automake: requires certain things to be done in your configure.in. You must automake: install the "m4" and "perl" packages to be able to use automake. automake: PACKAGE NAME: automake-1.6.3-noarch-1mp.txz PACKAGE LOCATION: ./development/automake/1.6.3 PACKAGE SIZE (compressed): 264 K PACKAGE SIZE (uncompressed): 1020 K PACKAGE REQUIRED: perl >= 5.10.1-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: automake: automake (a Makefile generator) automake: automake: This is Automake, a Makefile generator. It was inspired by the 4.4BSD automake: make and include files, but aims to be portable and to conform to the automake: GNU standards for Makefile variables and targets. Automake is a Perl automake: script. The input files are called Makefile.am. The output files are automake: called Makefile.in; they are intended for use with Autoconf. Automake automake: requires certain things to be done in your configure.in. You must automake: install the "m4" and "perl" packages to be able to use automake. automake: PACKAGE NAME: automake-1.9.6-noarch-1mp.txz PACKAGE LOCATION: ./development/automake/1.9.6 PACKAGE SIZE (compressed): 401 K PACKAGE SIZE (uncompressed): 1390 K PACKAGE REQUIRED: perl >= 5.10.1-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: automake: automake (a Makefile generator) automake: automake: This is Automake, a Makefile generator. It was inspired by the 4.4BSD automake: make and include files, but aims to be portable and to conform to the automake: GNU standards for Makefile variables and targets. Automake is a Perl automake: script. The input files are called Makefile.am. The output files are automake: called Makefile.in; they are intended for use with Autoconf. Automake automake: requires certain things to be done in your configure.in. You must automake: install the "m4" and "perl" packages to be able to use automake. automake: PACKAGE NAME: cppunit-1.12.1-i486-1mp.txz PACKAGE LOCATION: ./development/cppunit/1.12.1 PACKAGE SIZE (compressed): 451 K PACKAGE SIZE (uncompressed): 4950 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cppunit: cppunit cppunit: cppunit: CppUnit is a C++ unit testing framework. cppunit: It started its life as a port of JUnit to C++ by Michael Feathers. cppunit: cppunit: cppunit: PACKAGE NAME: lua-5.1.4.2-i486-1mp.txz PACKAGE LOCATION: ./development/lua/5.1.4-2 PACKAGE SIZE (compressed): 180 K PACKAGE SIZE (uncompressed): 980 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-5_slack13.1,ncurses >= 5.7-i486-1,readline >= 5.2-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lua: Lua - A powerful, fast, lightweight, embeddable scripting language. lua: lua: Lua combines simple procedural syntax with powerful data description lua: constructs based on associative arrays and extensible semantics. lua: Lua is dynamically typed, runs by interpreting bytecode for a lua: register-based virtual machine, and has automatic memory management lua: with incremental garbage collection, making it ideal for lua: configuration, scripting, and rapid prototyping. lua: PACKAGE NAME: lxrad-0.6-i486-1mp.txz PACKAGE LOCATION: ./development/lxrad/0.6 PACKAGE SIZE (compressed): 303 K PACKAGE SIZE (uncompressed): 2150 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,wxWidgets >= 2.8.11-i486-2mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lxrad: LXRAD - Linux X11 Rad Tools lxrad: lxrad: LXRAD means Linux X11 Rapid Application Development, LXRAD is written lxrad: in c++ and uses wxwidgets library. The LXRAD is a library and an RAD lxrad: tool. lxrad: PACKAGE NAME: povray-3.6.1-i486-1mp.txz PACKAGE LOCATION: ./development/povray/3.6.1 PACKAGE SIZE (compressed): 5387 K PACKAGE SIZE (uncompressed): 13080 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXdmcp >= 1.0.3-i486-1,libXpm >= 3.5.8-i486-1,libjpeg >= v8a-i486-1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: povray: POVRay - Persistence Of Vision Raytracer povray: povray: The Persistence of Vision Ray-Tracer creates three-dimensional, photo- povray: realistic images using a rendering technique called ray-tracing. It povray: reads in a text file containing information describing the objects and povray: lighting in a scene and generates an image of that scene from the view povray: point of a camera also described in the text file. Ray-tracing is not povray: a fast process by any means, but it produces very high quality images povray: with realistic reflections, shading, perspective and other effects. povray: PACKAGE NAME: wxWidgets-2.8.11-i486-2mp.txz PACKAGE LOCATION: ./development/wxWidgets/2.8.11 PACKAGE SIZE (compressed): 4214 K PACKAGE SIZE (uncompressed): 22460 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,sdl >= 1.2.14-i486-2,svgalib >= 1.9.25-i486-2,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wxWidgets: wxWidgets wxWidgets: wxWidgets: wxWidgets is a C++ library that lets developers create applications wxWidgets: for Windows, OS X, Linux and UNIX on 32-bit and 64-bit architectures wxWidgets: as well as several mobile platforms including Windows Mobile, iPhone wxWidgets: SDK and embedded GTK+. It has popular language bindings for Python, wxWidgets: Perl, Ruby and many other languages. Unlike other cross-platform wxWidgets: toolkits, wxWidgets gives its applications a truly native look and wxWidgets: feel because it uses the platform's native API rather than emulating wxWidgets: the GUI. It's also extensive, free, open-source and mature. wxWidgets: PACKAGE NAME: wxWidgets-2.9.1-i486-1mp.txz PACKAGE LOCATION: ./development/wxWidgets/2.9.1 PACKAGE SIZE (compressed): 6706 K PACKAGE SIZE (uncompressed): 25760 K PACKAGE REQUIRED: GConf >= 2.28.1-i486-1mp,ORBit2 >= 2.14.18-i486-1mp,atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cppunit >= 1.12.1-i486-1mp,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,dbus >= 1.2.24-i486-2,dbus-glib >= 0.86-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,gst-plugins-base >= 0.10.29-i486-1,gstreamer >= 0.10.29-i486-1,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,libxml2 >= 2.7.6-i486-1,mesa >= 7.8.1-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,sdl >= 1.2.14-i486-2,svgalib >= 1.9.25-i486-2,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wxWidgets: wxWidgets (development version) wxWidgets: wxWidgets: wxWidgets is a C++ library that lets developers create applications wxWidgets: for Windows, OS X, Linux and UNIX on 32-bit and 64-bit architectures wxWidgets: as well as several mobile platforms including Windows Mobile, iPhone wxWidgets: SDK and embedded GTK+. It has popular language bindings for Python, wxWidgets: Perl, Ruby and many other languages. Unlike other cross-platform wxWidgets: toolkits, wxWidgets gives its applications a truly native look and wxWidgets: feel because it uses the platform's native API rather than emulating wxWidgets: the GUI. It's also extensive, free, open-source and mature. wxWidgets: PACKAGE NAME: GConf-2.28.1-i486-1mp.txz PACKAGE LOCATION: ./libraries/GConf/2.28.1 PACKAGE SIZE (compressed): 978 K PACKAGE SIZE (uncompressed): 7690 K PACKAGE REQUIRED: ORBit2 >= 2.14.18-i486-1mp,atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,cyrus-sasl >= 2.1.23-i486-1,dbus >= 1.2.24-i486-2,dbus-glib >= 0.86-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,gtk+2 >= 2.18.9-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,libxml2 >= 2.7.6-i486-1,openldap-client >= 2.4.21-i486-1,openssl >= 0.9.8n-i486-1 | openssl-solibs >= 0.9.8n-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: GConf: GConf GConf: GConf: GConf is a system for storing application preferences. It is intended GConf: for user preferences; not configuration of something like Apache, or GConf: arbitrary data storage. GConf: PACKAGE NAME: ORBit2-2.14.18-i486-1mp.txz PACKAGE LOCATION: ./libraries/ORBit2/2.14.18 PACKAGE SIZE (compressed): 389 K PACKAGE SIZE (uncompressed): 2750 K PACKAGE REQUIRED: glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,libidl >= 0.8.10-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ORBit2: ORBit2 ORBit2: ORBit2: ORBit2 is a CORBA 2.4-compliant Object Request Broker (ORB) featuring ORBit2: mature C, C++ and Python bindings ORBit2: PACKAGE NAME: check-0.9.8-i486-1mp.txz PACKAGE LOCATION: ./libraries/check/0.9.8 PACKAGE SIZE (compressed): 97 K PACKAGE SIZE (uncompressed): 430 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: check: Check: a unit testing framework for C check: check: Check is a unit testing framework for C. It features a simple check: interface for defining unit tests, putting little in the way of the check: developer. Tests are run in a separate address space, so Check can check: catch both assertion failures and code errors that cause segmentation check: faults or other signals. The output from unit tests can be used check: within source code editors and IDEs. check: PACKAGE NAME: confuse-2.7-i486-1mp.txz PACKAGE LOCATION: ./libraries/confuse/2.7 PACKAGE SIZE (compressed): 85 K PACKAGE SIZE (uncompressed): 620 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: confuse: libConfuse confuse: confuse: libConfuse is a configuration file parser library, licensed under the confuse: terms of the ISC license, and written in C. It supports sections and confuse: (lists of) values (strings, integers, floats, booleans or other confuse: sections), as well as some other features (such as single/double-quoted confuse: strings, environment variable expansion, functions and nested include confuse: statements). It makes it very easy to add configuration file capability confuse: to a program using a simple API. confuse: PACKAGE NAME: epydoc-3.0.1-noarch-1mp.txz PACKAGE LOCATION: ./libraries/epydoc/3.0.1 PACKAGE SIZE (compressed): 1176 K PACKAGE SIZE (uncompressed): 16140 K PACKAGE REQUIRED: python >= 2.6.4-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: epydoc: Epydoc - Automatic API Documentation Generation for Python epydoc: epydoc: Epydoc is a tool for generating API documentation for Python modules, epydoc: based on their docstrings. For an example of epydoc's output, see the epydoc: API documentation for epydoc itself (html, pdf). A lightweight markup epydoc: language called epytext can be used to format docstrings, and to add epydoc: information about specific fields, such as parameters and instance epydoc: variables. Epydoc also understands docstrings written in epydoc: reStructuredText, Javadoc, and plaintext. For a more extensive example epydoc: of epydoc's output, see the API documentation for Python 2.5. epydoc: PACKAGE NAME: gtk+extra-2.1.2-i486-1mp.txz PACKAGE LOCATION: ./libraries/gtk+extra/2.1.2 PACKAGE SIZE (compressed): 938 K PACKAGE SIZE (uncompressed): 9890 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,gtk+2 >= 2.18.9-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtk+extra: Gtk+Extra gtk+extra: gtk+extra: GtkExtra is a useful set of widgets for creating GUI's for the gtk+extra: Xwindows system using GTK+. You can use it complementary to GTK+ and gtk+extra: it is written in C. It is also Free Software and released under the gtk+extra: LGPL license. gtk+extra: PACKAGE NAME: gtkglext-1.2.0-i486-1mp.txz PACKAGE LOCATION: ./libraries/gtkglext/1.2.0 PACKAGE SIZE (compressed): 230 K PACKAGE SIZE (uncompressed): 2230 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXmu >= 1.0.5-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtkglext: GtkGLext gtkglext: gtkglext: GtkGLExt is an OpenGL extension to GTK+. It provides additional GDK gtkglext: objects which support OpenGL rendering in GTK+ and GtkWidget API gtkglext: add-ons to make GTK+ widgets OpenGL-capable. In contrast to Janne gtkglext: Löf's GtkGLArea, GtkGLExt provides a GtkWidget API that enables gtkglext: OpenGL drawing for standard and custom GTK+ widgets. gtkglext: PACKAGE NAME: gtksourceview-2.11.2-i486-1mp.txz PACKAGE LOCATION: ./libraries/gtksourceview/2.11.2 PACKAGE SIZE (compressed): 800 K PACKAGE SIZE (uncompressed): 5760 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-4_slack13.1,gtk+2 >= 2.18.9-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,libxml2 >= 2.7.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtksourceview: GtkSourceView gtksourceview: gtksourceview: GtkSourceView is a portable C library that extends the standard GTK+ gtksourceview: framework for multiline text editing with support for configurable gtksourceview: syntax highlighting, unlimited undo/redo, UTF-8 compliant caseless gtksourceview: searching, printing and other features typical of a source code gtksourceview: editor. gtksourceview: PACKAGE NAME: icu-4.4.1-i486-1mp.txz PACKAGE LOCATION: ./libraries/icu/4.4.1 PACKAGE SIZE (compressed): 8108 K PACKAGE SIZE (uncompressed): 42550 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: icu: icu - icu: icu: ICU is a mature, widely used set of C/C++ and Java libraries providing icu: Unicode and Globalization support for software applications. ICU is icu: widely portable and gives applications the same results on all icu: platforms and between C/C++ and Java software. icu: PACKAGE NAME: judy-1.0.5-i486-1mp.txz PACKAGE LOCATION: ./libraries/judy/1.0.5 PACKAGE SIZE (compressed): 157 K PACKAGE SIZE (uncompressed): 840 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: judy: Judy judy: judy: Judy is a C library that provides a state-of-the-art core technology judy: that implements a sparse dynamic array. Judy arrays are declared judy: simply with a null pointer. A Judy array consumes memory only when it judy: is populated, yet can grow to take advantage of all available memory judy: if desired. Judy's key benefits are scalability, high performance, and judy: memory efficiency. A Judy array is extensible and can scale up to a judy: very large number of elements, bounded only by machine memory. judy: PACKAGE NAME: lapack-3.2.2-i486-1mp.txz PACKAGE LOCATION: ./libraries/lapack/3.2.2 PACKAGE SIZE (compressed): 2466 K PACKAGE SIZE (uncompressed): 18100 K PACKAGE REQUIRED: gcc >= 4.4.4-i486-1,gcc-gfortran >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lapack: LAPACK - Linear Algebra PACKage lapack: lapack: LAPACK is written in Fortran90 and provides routines for solving lapack: systems of simultaneous linear equations, least-squares solutions of lapack: linear systems of equations, eigenvalue problems, and singular value lapack: problems. The associated matrix factorizations (LU, Cholesky, QR, SVD, lapack: Schur, generalized Schur) are also provided, as are related lapack: computations such as reordering of the Schur factorizations and lapack: estimating condition numbers. lapack: PACKAGE NAME: latex2html-2008-i486-1mp.txz PACKAGE LOCATION: ./libraries/latex2html/2008 PACKAGE SIZE (compressed): 698 K PACKAGE SIZE (uncompressed): 6020 K PACKAGE REQUIRED: perl >= 5.10.1-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: latex2html: LaTeX2HTML latex2html: latex2html: A Perl program that translates LaTeX into HTML (HyperText Markup latex2html: Language), optionally creating separate HTML files corresponding to latex2html: each unit (e.g., section) of the document. LaTeX2HTML proceeds by latex2html: interpreting LaTeX (to the best of its abilities). It contains latex2html: definitions from a wide variety of classes and packages, and users latex2html: may add further definitions by writing Perl scripts that provide latex2html: information about class/package commands. latex2html: PACKAGE NAME: libmspack-0.2-i486-1mp.txz PACKAGE LOCATION: ./libraries/libmspack/0.2alpha PACKAGE SIZE (compressed): 86 K PACKAGE SIZE (uncompressed): 310 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmspack: LibMSpack libmspack: libmspack: The purpose of libmspack is to provide both compression and libmspack: decompression of some loosely related file formats used by libmspack: Microsoft. The intention is to support all of the following libmspack: formats: COMPRESS.EXE (.??_), Microsoft Help (.HLP), libmspack: Microsoft Cabinet (.CAB), HTML Help (.CHM), Microsoft eBook (.LIT). libmspack: libmspack: libmspack: PACKAGE NAME: libserial-0.6.0rc1-i486-1mp.txz PACKAGE LOCATION: ./libraries/libserial/0.6.0rc1 PACKAGE SIZE (compressed): 89 K PACKAGE SIZE (uncompressed): 310 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libserial: Libserial libserial: libserial: LibSerial provides a collection of C++ classes that allow one to libserial: access serial ports on POSIX systems like standard C++ iostream libserial: objects. The SerialStream class represents the primary class that is libserial: expected to be used by developers to access serial ports as iostream libserial: objects. Additionally a SerialPort class is available to provide access libserial: to serial ports without using the standard C++ iostream interface. This libserial: is useful for embedded systems where a complete C++ STL may not be libserial: available. libserial: PACKAGE NAME: libstroke-0.5.1-i486-1mp.txz PACKAGE LOCATION: ./libraries/libstroke/0.5.1 PACKAGE SIZE (compressed): 53 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libstroke: LibStroke - A stroke translation library libstroke: libstroke: LibStroke is a stroke translation library. Strokes are motions of libstroke: the mouse that can be interpreted by a program as a command. Strokes libstroke: are used extensively in CAD programs. I fell in love with them when I libstroke: was using the CAD tools that use a stroke interface to select tools libstroke: or perform actions. I wrote this library so that others can see how libstroke: useful strokes can be and so that more programs take advantage of libstroke: this extremely natural human-computer interface. libstroke: PACKAGE NAME: libunique-1.1.6-i486-1mp.txz PACKAGE LOCATION: ./libraries/libunique/1.1.6 PACKAGE SIZE (compressed): 73 K PACKAGE SIZE (uncompressed): 430 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,dbus >= 1.2.24-i486-2,dbus-glib >= 0.86-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-3,gtk+2 >= 2.18.9-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libunique: LibUnique libunique: libunique: Unique is a library for writing single instance application. If you libunique: launch a single instance application twice, the second instance will libunique: either just quit or will send a message to the running instance. libunique: PACKAGE NAME: pyusb-1.0.0-a1-noarch-1mp.txz PACKAGE LOCATION: ./libraries/pyusb/1.0.0-a1 PACKAGE SIZE (compressed): 56 K PACKAGE SIZE (uncompressed): 370 K PACKAGE REQUIRED: python >= 2.6.4-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pyusb: PyUSB pyusb: pyusb: PyUSB is a python library that aims to provide easy USB devices access. pyusb: PACKAGE NAME: xblas-1.0.248-i486-1mp.txz PACKAGE LOCATION: ./libraries/xblas/1.0.248 PACKAGE SIZE (compressed): 827 K PACKAGE SIZE (uncompressed): 4950 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xblas: XBLAS - Extra Precise Basic Linear Algebra Subroutines xblas: xblas: This library of routines is part of a reference implementation for xblas: the Dense and Banded BLAS routines, along with their Extended and xblas: Mixed Precision versions. EXTENDED PRECISION is only used internally; xblas: the input and output arguments remain the same as in the existing BLAS. xblas: At present, we only allow Single, Double, or Extra internal precision. xblas: Extra precision is implemented as double-double precision (128-bit xblas: total, 106-bit significand). MIXED PRECISION permits some input/output xblas: arguments to be of different types (mixing real and complex) or xblas: precisions (mixing single and double). PACKAGE NAME: xerces-c-3.1.1-i486-1mp.txz PACKAGE LOCATION: ./libraries/xerces-c/3.1.1 PACKAGE SIZE (compressed): 3433 K PACKAGE SIZE (uncompressed): 33440 K PACKAGE REQUIRED: curl >= 7.20.1-i486-1,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,cyrus-sasl >= 2.1.23-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-3,icu >= 4.4.1-i486-1mp,libidn >= 1.5-i486-1,openldap-client >= 2.4.21-i486-1,openssl >= 0.9.8n-i486-1 | openssl-solibs >= 0.9.8n-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xerces-c: Xerces-C xerces-c: xerces-c: Xerces-C++ is a validating XML parser written in a portable subset xerces-c: of C++. Xerces-C++ makes it easy to give your application the xerces-c: ability to read and write XML data. A shared library is provided for xerces-c: parsing, generating, manipulating, and validating XML documents xerces-c: using the DOM, SAX, and SAX2 APIs. Xerces-C++ is faithful to the xerces-c: XML 1.0 recommendation and many associated standards. The parser xerces-c: provides high performance, modularity, and scalability. xerces-c: PACKAGE NAME: xforms-1.0.93-i486-1mp.txz PACKAGE LOCATION: ./libraries/xforms/1.0.93 PACKAGE SIZE (compressed): 1000 K PACKAGE SIZE (uncompressed): 2900 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-3,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXpm >= 3.5.8-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libjpeg >= v8a-i486-1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,util-linux-ng >= 2.17.2-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xforms: XForms xforms: xforms: XForms is a graphical user interface toolkit for X based on the X11 xforms: Xlib library. It's written in C and allows to easily write GUIs for xforms: programs. For that it comes with a lot of widgets (buttons, menus, xforms: input fields, scrollbars, you name it) as well as fdesign, a tool xforms: that lets you create a GUI using a GUI. In addition, the library is xforms: extensible and new objects can easily be created and added to the xforms: library. xforms: PACKAGE NAME: xylib-0.8-i486-1mp.txz PACKAGE LOCATION: ./libraries/xylib/0.8 PACKAGE SIZE (compressed): 223 K PACKAGE SIZE (uncompressed): 1140 K PACKAGE REQUIRED: bzip2 >= 1.0.6-i486-1_slack13.1,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xylib: XYlib xylib: xylib: xylib is a portable C++ library for reading files that contain x-y xylib: data from powder diffraction, spectroscopy or other experimental xylib: methods. Supported formats in the file README in the archive xylib: PACKAGE NAME: libftdi-0.18-i486-2mp.txz PACKAGE LOCATION: ./libraries/libftdi/0.18 PACKAGE SIZE (compressed): 173 K PACKAGE SIZE (uncompressed): 1710 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,libusb >= 1.0.6-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libftdi: LibFTDI libftdi: libftdi: A library to talk to FTDI chips: FT232BM/245BM, FT2232C/D and libftdi: FT232/245R using libusb, including the popular bitbang mode. This libftdi: library is linked with your program in userspace, no kernel driver libftdi: required. libftdi: PACKAGE NAME: narray-0.5.9p9-i486-1mp.txz PACKAGE LOCATION: ./libraries/narray/0.5.9p9 PACKAGE SIZE (compressed): 136 K PACKAGE SIZE (uncompressed): 500 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-5_slack13.1,ruby >= 1.9.1_p378-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: narray: NArray - Numerical Ruby NArray narray: narray: NArray is an Numerical N-dimensional Array class. Supported element narray: types are 1/2/4-byte Integer, single/double-precision Real/Complex, narray: and Ruby Object. This extension library incorporates fast calculation narray: and easy manipulation of large numerical arrays into the Ruby language. narray: NArray has features similar to NumPy, but NArray has vector and matrix narray: subclasses. narray: PACKAGE NAME: xcircuit-3.7.19-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/xcircuit/development/3.7.19 PACKAGE SIZE (compressed): 480 K PACKAGE SIZE (uncompressed): 2440 K PACKAGE REQUIRED: expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXScrnSaver >= 1.2.0-i486-1,libXau >= 1.0.5-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXft >= 2.1.14-i486-1,libXpm >= 3.5.8-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libxcb >= 1.6-i486-1,tcl >= 8.5.8-i486-1,tk >= 8.5.8-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcircuit: XCircuit xcircuit: xcircuit: XCircuit is a UNIX/X11 program for drawing publishable-quality xcircuit: electrical circuit schematic diagrams and related figures, and xcircuit: produce circuit netlists through schematic capture. XCircuit regards xcircuit: circuits as inherently hierarchical, and writes both hierarchical xcircuit: PostScript output and hierarchical SPICE netlists. Circuit components xcircuit: are saved in and retrieved from libraries which are fully editable. xcircuit: XCircuit does not separate artistic expression from circuit drawing; xcircuit: it maintains flexiblity in style without compromising the power of xcircuit: schematic capture. PACKAGE NAME: toped-0.9.7.1-i486-1mp.txz PACKAGE LOCATION: ./Categories/ICLayoutEditor/toped/0.9.7.1 PACKAGE SIZE (compressed): 1877 K PACKAGE SIZE (uncompressed): 9200 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glew >= 1.5.1-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXmu >= 1.0.5-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,wxWidgets >= 2.8.11-i486-2mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: toped: Toped toped: toped: Toped is a cross-platform IC layout editor supporting GDS, OASIS and toped: CIF formats. It is an open source project licensed under the GNU toped: General Public License. The project is under active development. toped: toped: PACKAGE NAME: sdcc-6360-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/sdcc/devel-r6360 PACKAGE SIZE (compressed): 3643 K PACKAGE SIZE (uncompressed): 85130 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,latex2html >= 2008-i486-1mp,libtermcap >= 1.2.3-i486-7,lyx >= 1.6.9-i486-1mp,python >= 2.6.4-i486-1,readline >= 5.2-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sdcc: SDCC sdcc: sdcc: SDCC is a retargettable, optimizing ANSI - C compiler that targets sdcc: the Intel 8051, Maxim 80DS390, Zilog Z80 and the Motorola 68HC08 sdcc: based MCUs. Work is in progress on supporting the Microchip PIC16 sdcc: and PIC18 series. SDCC is Free Open Source Software, distributed sdcc: under GNU General Public License (GPL). sdcc: PACKAGE NAME: kicad-20110327-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/kicad/devel-20110327-r2924 PACKAGE SIZE (compressed): 97681 K PACKAGE SIZE (uncompressed): 484390 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.2-i486-1mp,libpng >= 1.4.3-i486-1_slack13.1,libtiff >= 3.9.4-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,pango >= 1.26.2-i486-1,pixman >= 0.16.6-i486-1,util-linux-ng >= 2.17.2-i486-1,wxWidgets >= 2.8.11-i486-2mp,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: kicad: KiCAD kicad: kicad: Kicad is an open source (GPL) software for the creation of electronic kicad: schematic diagrams and printed circuit board artwork. kicad: PACKAGE NAME: qucs-0.0.16-i486-1mp.txz PACKAGE LOCATION: ./Categories/Simulation/qucs/0.0.16 PACKAGE SIZE (compressed): 4816 K PACKAGE SIZE (uncompressed): 17080 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,lcms >= 1.19-i486-1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXft >= 2.1.14-i486-1,libXinerama >= 1.1-i486-1,libXmu >= 1.0.5-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libjpeg >= v8a-i486-1,libmng >= 1.0.10-i486-2,libpng >= 1.4.3-i486-1_slack13.1,libxcb >= 1.6-i486-1,mesa >= 7.8.1-i486-1,perl >= 5.10.1-i486-1,qt3 >= 3.3.8b-i486-opt1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: qucs: Qucs qucs: qucs: Qucs is an integrated circuit simulator which means you are able to qucs: setup a circuit with a graphical user interface (GUI) and simulate qucs: the large-signal, small-signal and noise behaviour of the circuit. qucs: After that simulation has finished you can view the simulation qucs: results on a presentation page or window. qucs: PACKAGE NAME: sdcc-6411-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/sdcc/devel-r6411 PACKAGE SIZE (compressed): 3644 K PACKAGE SIZE (uncompressed): 85150 K PACKAGE REQUIRED: cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,gcc >= 4.4.4-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,latex2html >= 2008-i486-1mp,libtermcap >= 1.2.3-i486-7,lyx >= 1.6.9-i486-1mp,python >= 2.6.4-i486-1,readline >= 5.2-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sdcc: SDCC sdcc: sdcc: SDCC is a retargettable, optimizing ANSI - C compiler that targets sdcc: the Intel 8051, Maxim 80DS390, Zilog Z80 and the Motorola 68HC08 sdcc: based MCUs. Work is in progress on supporting the Microchip PIC16 sdcc: and PIC18 series. SDCC is Free Open Source Software, distributed sdcc: under GNU General Public License (GPL). sdcc: PACKAGE NAME: op-0.7.8-i486-1mp.txz PACKAGE LOCATION: ./Categories/Utilities/openprogrammer/op/0.7.8 PACKAGE SIZE (compressed): 97 K PACKAGE SIZE (uncompressed): 380 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-5_slack13.1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: op: OpenProgrammer op: op: OP is a command-line executable; the Windows version doesn't need op: installation; the Linux version uses device /dev/usb/hiddev0 (or the op: one specified as parameter) and needs reading rights for it e.g.: op: op: sudo chmod a+r /dev/usb/hiddev0 op: PACKAGE NAME: maxima-5.24.0-i486-1mp.txz PACKAGE LOCATION: ./Categories/ScientificComputation/maxima/5.24.0 PACKAGE SIZE (compressed): 9473 K PACKAGE SIZE (uncompressed): 43010 K PACKAGE REQUIRED: glibc-solibs >= 2.11.1-i486-5_slack13.1,ncurses >= 5.7-i486-1,readline >= 5.2-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: maxima: Maxima maxima: maxima: Maxima is a system for the manipulation of symbolic and numerical maxima: expressions, including differentiation, integration, Taylor series, maxima: Laplace transforms, ordinary differential equations, systems of maxima: linear equations, polynomials, and sets, lists, vectors, matrices, maxima: and tensors. Maxima yields high precision numeric results by using maxima: exact fractions, arbitrary precision integers, and variable precision maxima: floating point numbers. Maxima can plot functions and data in two and maxima: three dimensions. maxima: PACKAGE NAME: xcircuit-3.7.24-i486-1mp.txz PACKAGE LOCATION: ./Categories/T-CAD-CAM-EDA/xcircuit/development/3.7.24 PACKAGE SIZE (compressed): 484 K PACKAGE SIZE (uncompressed): 2450 K PACKAGE REQUIRED: expat >= 2.0.1-i486-2_slack13.1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXScrnSaver >= 1.2.0-i486-1,libXau >= 1.0.5-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXft >= 2.1.14-i486-1,libXpm >= 3.5.8-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libxcb >= 1.6-i486-1,tcl >= 8.5.8-i486-1,tk >= 8.5.8-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xcircuit: XCircuit xcircuit: xcircuit: XCircuit is a UNIX/X11 program for drawing publishable-quality xcircuit: electrical circuit schematic diagrams and related figures, and xcircuit: produce circuit netlists through schematic capture. XCircuit regards xcircuit: circuits as inherently hierarchical, and writes both hierarchical xcircuit: PostScript output and hierarchical SPICE netlists. Circuit components xcircuit: are saved in and retrieved from libraries which are fully editable. xcircuit: XCircuit does not separate artistic expression from circuit drawing; xcircuit: it maintains flexiblity in style without compromising the power of xcircuit: schematic capture. PACKAGE NAME: gwyddion-2.24-i486-1mp.txz PACKAGE LOCATION: ./Categories/Analyze&Visualize/gwyddion/2.24 PACKAGE SIZE (compressed): 2011 K PACKAGE SIZE (uncompressed): 13130 K PACKAGE REQUIRED: atk >= 1.30.0-i486-1,cairo >= 1.8.8-i486-3,cxxlibs >= 6.0.13-i486-2 | gcc-g++ >= 4.4.4-i486-1,dbus >= 1.2.24-i486-2,dbus-glib >= 0.86-i486-1,epydoc >= 3.0.1-noarch-1mp,expat >= 2.0.1-i486-2_slack13.1,fftw >= 3.2.2-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.3.12-i486-1,gcc >= 4.4.4-i486-1,glib2 >= 2.22.5-i486-1,glibc-solibs >= 2.11.1-i486-5_slack13.1,gtk+2 >= 2.18.9-i486-1,gtkglext >= 1.2.0-i486-1mp,gtksourceview >= 2.11.2-i486-1mp,libICE >= 1.0.6-i486-1,libSM >= 1.1.1-i486-1,libX11 >= 1.3.3-i486-1,libXau >= 1.0.5-i486-1,libXcomposite >= 0.4.1-i486-1,libXcursor >= 1.1.10-i486-1,libXdamage >= 1.1.2-i486-1,libXdmcp >= 1.0.3-i486-1,libXext >= 1.1-i486-1,libXfixes >= 4.0.4-i486-1,libXi >= 1.3-i486-1,libXinerama >= 1.1-i486-1,libXmu >= 1.0.5-i486-1,libXrandr >= 1.3.0-i486-1,libXrender >= 0.9.5-i486-1,libXt >= 1.0.8-i486-1,libXxf86vm >= 1.1.0-i486-1,libdrm >= 2.4.20-i486-1,libpng >= 1.4.3-i486-1_slack13.1,libunique >= 1.1.6-i486-1mp,libxcb >= 1.6-i486-1,libxml2 >= 2.7.6-i486-1,mesa >= 7.8.1-i486-1,narray >= 0.5.9p9-i486-1mp,pango >= 1.26.2-i486-1,perl >= 5.10.1-i486-1,pixman >= 0.16.6-i486-1,python >= 2.6.4-i486-1,qt >= 4.6.2_2d3d3e5-i486-1,util-linux-ng >= 2.17.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gwyddion: Gwyddion gwyddion: gwyddion: Gwyddion is a modular program for SPM (scanning probe microscopy) gwyddion: data visualization and analysis. Primarily it is intended for analysis gwyddion: of height fields obtained by scanning probe microscopy techniques gwyddion: (AFM, MFM, STM, SNOM/NSOM), however it can be generally used for any gwyddion: other height field and image analysis, for instance for analysis of gwyddion: profilometry data. gwyddion: