PACKAGES.TXT;  Wed May 16 23:14:12 CEST 2012

This file provides details on the packages found on this site
Total size of all packages (compressed) :  356 MB
Total size of all packages (uncompressed) :  1786 MB

PACKAGE NAME:  libtlc54x-0.1.1-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Acquire&Measure/libtlc54x/0.1.1
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libtlc54x: LibTLC54x
libtlc54x:
libtlc54x: libTLC54x is a library to communicate with the Texas Instruments
libtlc54x: TLC548/TLC549 8-Bit A/D-Converter via serial or parallel connector.
libtlc54x: The library just needs the device to be opened and than you can read
libtlc54x: data from the TLC54x. It hides the process of getting the data bit by
libtlc54x: bit and also hides the wait states.
libtlc54x:

PACKAGE NAME:  dinotrace-9.4c-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Analyze&Visualize/dinotrace/9.4c
PACKAGE SIZE (compressed):  196 K
PACKAGE SIZE (uncompressed):  630 K
PACKAGE REQUIRED:  freetype >= 2.4.4-i486-1,glibc-solibs >= 2.13-i486-4,lesstif >= 0.95.2-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXp >= 1.0.1-i486-1,libXt >= 1.1.1-i486-1,libxcb >= 1.7-i486-1,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
dinotrace: Dinotrace
dinotrace:
dinotrace: Dinotrace is a Verilog/VHDL waveform viewer for logic design traces
dinotrace: for Linux/Windows X11. It includes color highlighting and back
dinotrace: annotation of trace values onto source code inside Emacs.
dinotrace:

PACKAGE NAME:  fityk-0.9.7-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Analyze&Visualize/fityk/0.9.7
PACKAGE SIZE (compressed):  1715 K
PACKAGE SIZE (uncompressed):  6590 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,bzip2 >= 1.0.6-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXxf86vm >= 1.1.1-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.3a-i486-1mp,libpng >= 1.4.5-i486-1,libtiff >= 3.9.4-i486-2,libxcb >= 1.7-i486-1,lua >=5.1.4.2-i486-1mp,ncurses >= 5.9-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,python >= 2.6.6-i486-1,readline >= 5.2-i486-4,util-linux >= 2.19-i486-1,wxWidgets >= 2.9.1-i486-1mp,xylib >= 0.8-i486-1mp,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
fityk: Fityk
fityk:
fityk: Fityk is a program for nonlinear fitting of analytical functions
fityk: (especially peak-shaped) to data (usually experimental data). There
fityk: are also people using it to remove the baseline from data, or to
fityk: display data only. It is reportedly used in crystallography,
fityk: chromatography, photoluminescence and photoelectron spectroscopy,
fityk: infrared and Raman spectroscopy, to name but a few.
fityk:

PACKAGE NAME:  gaw-20111016-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Analyze&Visualize/gaw/20111016
PACKAGE SIZE (compressed):  1211 K
PACKAGE SIZE (uncompressed):  6890 K
PACKAGE REQUIRED:  alsa-lib >= 1.0.24.1-i486-1,atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.8-i486-1_slack13.37,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gaw: GAW
gaw:
gaw: Gaw is a tool for displaying analog data files from the output of
gaw: simulators or real life recorded and sampled data. Gaw is based on
gaw: the Gtk2+ toolkit.
gaw:

PACKAGE NAME:  gerbv-2.5.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Analyze&Visualize/gerbv/2.5.0
PACKAGE SIZE (compressed):  767 K
PACKAGE SIZE (uncompressed):  5710 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gerbv: Gerbv
gerbv:
gerbv: GerbV (GerberViewer) is a viewer for Gerber files; these files are
gerbv: generated from PCB CAD system and sent to PCB manufacturers as basis
gerbv: for the manufacturing process. The different layers of the PCB are
gerbv: separated into different files. Gerbv is a program which can display,
gerbv: edit, export, and do other manipulation of file formats used in PCB
gerbv: design (RS274X, Excellon drill, and pick-and-place).
gerbv: 

PACKAGE NAME:  gtkwave-3.3.36-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Analyze&Visualize/gtkwave/3.3.36
PACKAGE SIZE (compressed):  2076 K
PACKAGE SIZE (uncompressed):  5130 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,bzip2 >= 1.0.6-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.8-i486-1_slack13.37,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-5_slack13.37,gtk+2 >= 2.24.4-i486-1,judy >= 1.0.5-i486-1mp,libX11 >= 1.4.3-i486-2,libXScrnSaver >= 1.2.1-i486-1,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXft >= 2.2.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.9-i486-1_slack13.37,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,tcl >= 8.5.9-i486-1,tk >= 8.5.9-i486-1,xz >= 5.0.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtkwave: GTKWave
gtkwave:
gtkwave: GTKWave is a fully featured GTK+ based wave viewer for Unix-GNU/Linux
gtkwave: which reads LXT, LXT2, VZT, FST, and GHW files as well as standard
gtkwave: Verilog VCD/EVCD files and allows their viewing.
gtkwave:

PACKAGE NAME:  gwyddion-2.27-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Analyze&Visualize/gwyddion/2.27
PACKAGE SIZE (compressed):  2117 K
PACKAGE SIZE (uncompressed):  13860 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,bzip2 >= 1.0.6-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,dbus >= 1.4.1-i486-1,dbus-glib >= 0.88-i486-1,epydoc >= 3.0.1-noarch-1mp,expat >= 2.0.1-i486-2,fftw >= 3.2.2-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.8-i486-1_slack13.37,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-5_slack13.37,gtk+2 >= 2.24.4-i486-1,gtkglext >= 1.2.0-i486-1mp,gtksourceview >= 2.11.2-i486-1mp,ilmbase >= 1.0.2-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXmu >= 1.1.0-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXt >= 1.1.1-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libpng >= 1.4.9-i486-1_slack13.37,libunique >= 1.1.6-i486-1mp,libxcb >= 1.7-i486-1,libxml2 >= 2.7.8-i486-3,mesa >= 7.9.2-i486-1,narray >= 0.6.0.1-i486-1mp,openexr >= 1.7.0-i486-1,pango >= 1.28.4-i486-1,perl >= 5.12.3-i486-1,pixman >= 0.20.2-i486-1,python >= 2.6.6-i486-1,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gwyddion: Gwyddion
gwyddion:
gwyddion: Gwyddion is a modular program for SPM (scanning probe microscopy)
gwyddion: data visualization and analysis. Primarily it is intended for analysis
gwyddion: of height fields obtained by scanning probe microscopy techniques
gwyddion: (AFM, MFM, STM, SNOM/NSOM), however it can be generally used for any
gwyddion: other height field and image analysis, for instance for analysis of
gwyddion: profilometry data.
gwyddion:

PACKAGE NAME:  openhantek-0.2.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Analyze&Visualize/openhantek/0.2.0
PACKAGE SIZE (compressed):  146 K
PACKAGE SIZE (uncompressed):  440 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fftw >= 3.2.2-i486-1,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXrender >= 0.9.6-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libpng >= 1.4.8-i486-1_slack13.37,libusb >= 1.0.8-i486-2,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,qt >= 4.7.0_7abde40-i486-3,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
openhantek: OpenHantek
openhantek:
openhantek: OpenHantek is a free software for Hantek (Voltcraft - Darkwire -
openhantek: Protek/Acetech) USB DSOs based on HantekDSO. The UI is written in
openhantek: C++/Qt 4 and uses OpenGL to draw the graphs. OpenHantek has started as
openhantek: an alternative to the official Hantek DSO software for Linux users.
openhantek:

PACKAGE NAME:  lyx-1.6.10-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Authoring/lyx/1.6.10
PACKAGE SIZE (compressed):  7772 K
PACKAGE SIZE (uncompressed):  43960 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,enchant >= 1.5.0-i486-1,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.8-i486-1_slack13.37,libxcb >= 1.7-i486-1,qt >= 4.7.0_7abde40-i486-3,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lyx: LyX
lyx:
lyx: LyX is a document processor that encourages an approach to writing
lyx: based on the structure of your documents (WYSIWYM) and not simply
lyx: their appearance (WYSIWYG). LyX combines the power and flexibility of
lyx: TeX/LaTeX with the ease of use of a graphical interface. This results
lyx: in world-class support for creation of mathematical content (via a
lyx: fully integrated equation editor) and structured documents like
lyx: academic articles, theses, and books.
lyx:

PACKAGE NAME:  lyx-2.0.3-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Authoring/lyx/2.0.3
PACKAGE SIZE (compressed):  8788 K
PACKAGE SIZE (uncompressed):  50290 K
PACKAGE REQUIRED:  aspell >= 0.60.6-i486-1,bzip2 >= 1.0.6-i486-1,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,enchant >= 1.5.0-i486-1,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.8-i486-1_slack13.37,gcc >= 4.5.2-i486-2,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-5_slack13.37,hunspell >= 1.2.9-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.9-i486-1_slack13.37,libxcb >= 1.7-i486-1,qt >= 4.7.0_7abde40-i486-3,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lyx: LyX
lyx:
lyx: LyX is a document processor that encourages an approach to writing
lyx: based on the structure of your documents (WYSIWYM) and not simply
lyx: their appearance (WYSIWYG). LyX combines the power and flexibility of
lyx: TeX/LaTeX with the ease of use of a graphical interface. This results
lyx: in world-class support for creation of mathematical content (via a
lyx: fully integrated equation editor) and structured documents like
lyx: academic articles, theses, and books.
lyx:

PACKAGE NAME:  toped-0.9.8-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/ICLayoutEditor/toped/0.9.8
PACKAGE SIZE (compressed):  1997 K
PACKAGE SIZE (uncompressed):  10000 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,bzip2 >= 1.0.6-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.8-i486-1_slack13.37,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glew >= 1.5.7-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-5_slack13.37,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXmu >= 1.1.0-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXt >= 1.1.1-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.3a-i486-1mp,libpng >= 1.4.9-i486-1_slack13.37,libtiff >= 3.9.6-i486-1_slack13.37,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,util-linux >= 2.19-i486-1,wxWidgets >= 2.8.12-i486-1mp,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
toped: Toped
toped:
toped: Toped is a cross-platform IC layout editor supporting GDS, OASIS and
toped: CIF formats. It is an open source project licensed under the GNU
toped: General Public License. The project is under active development.
toped: 
toped:

PACKAGE NAME:  usbpicprog-0.4.2-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/IDE/usbpicprog/0.4.2
PACKAGE SIZE (compressed):  677 K
PACKAGE SIZE (uncompressed):  6520 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXxf86vm >= 1.1.1-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.3a-i486-1mp,libpng >= 1.4.5-i486-1,libtiff >= 3.9.4-i486-2,libusb >= 1.0.8-i486-2,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,util-linux >= 2.19-i486-1,wxWidgets >= 2.9.2-i486-1mp,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
usbpicprog: USBPicProg
usbpicprog:
usbpicprog: usbpicprog, a free and open source Microchip PIC programmer for the
usbpicprog: USB port.
usbpicprog:

PACKAGE NAME:  maxima-5.27.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/ScientificComputation/maxima/5.27.0
PACKAGE SIZE (compressed):  10427 K
PACKAGE SIZE (uncompressed):  45100 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-5_slack13.37,ncurses >= 5.9-i486-1,readline >= 5.2-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
maxima: Maxima
maxima:
maxima: Maxima is a system for the manipulation of symbolic and numerical
maxima: expressions, including differentiation, integration, Taylor series,
maxima: Laplace transforms, ordinary differential equations, systems of
maxima: linear equations, polynomials, and sets, lists, vectors, matrices,
maxima: and tensors. Maxima yields high precision numeric results by using
maxima: exact fractions, arbitrary precision integers, and variable precision
maxima: floating point numbers. Maxima can plot functions and data in two and
maxima: three dimensions.
maxima:

PACKAGE NAME:  gnusim8085-1.3.7-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Simulation/gnusim8085/1.3.7
PACKAGE SIZE (compressed):  108 K
PACKAGE SIZE (uncompressed):  770 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,gtksourceview >= 2.11.2-i486-1mp,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,libxml2 >= 2.7.8-i486-3,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gnusim8085: GNUSim8085 (GNU Simulator 8085)
gnusim8085:
gnusim8085: GNUSim8085 is a graphical simulator, assembler and debugger for
gnusim8085: the Intel 8085 microprocessor
gnusim8085:

PACKAGE NAME:  gpsim-0.26.1-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Simulation/gpsim/0.26.1
PACKAGE SIZE (compressed):  2179 K
PACKAGE SIZE (uncompressed):  12510 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gputils >= 0.14.0-i486-1mp,gtk+2 >= 2.24.4-i486-1,gtk+extra >= 2.1.2cvs-i486-1mp,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.8-i486-1_slack13.37,libtermcap >= 1.2.3-i486-7,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,popt >= 1.7-i486-3,readline >= 5.2-i486-4,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gpsim: gpsim
gpsim:
gpsim: gpsim is a full-featured software simulator for Microchip(tm) PIC
gpsim: microcontrollers distributed under the GNU  General Public License
gpsim: gpsim has been designed to be as accurate as possible. Accuracy
gpsim: includes the entire PIC, from the core to the I/O pins and including
gpsim: all of the internal peripherals. Thus it's possible to create stimuli
gpsim: and tie them to the I/O pins and test the PIC the same PIC the same
gpsim: way you would in the real world.
gpsim:

PACKAGE NAME:  ngspice-24-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Simulation/ngspice/24
PACKAGE SIZE (compressed):  1497 K
PACKAGE SIZE (uncompressed):  7130 K
PACKAGE REQUIRED:  gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-5_slack13.37,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXaw >= 1.0.9-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXmu >= 1.1.0-i486-1,libXpm >= 3.5.9-i486-1,libXt >= 1.1.1-i486-1,libxcb >= 1.7-i486-1,ncurses >= 5.9-i486-1,readline >= 5.2-i486-4,util-linux >= 2.19-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ngspice: NGSpice-rework
ngspice:
ngspice: Ngspice is a mixed-level/mixed-signal circuit simulator. Its code is
ngspice: based on three open source software packages: Spice3f5, Cider1b1 and
ngspice: Xspice.
ngspice:

PACKAGE NAME:  qucs-0.0.16-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Simulation/qucs/0.0.16
PACKAGE SIZE (compressed):  4702 K
PACKAGE SIZE (uncompressed):  16090 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,lcms >= 1.19-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXft >= 2.2.0-i486-1,libXinerama >= 1.1.1-i486-1,libXmu >= 1.1.0-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXt >= 1.1.1-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libjpeg >= v8a-i486-1,libmng >= 1.0.10-i486-2,libpng >= 1.4.8-i486-1_slack13.37,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,perl >= 5.12.3-i486-1,qt3 >= 3.3.8b-i486-1mp,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
qucs: Qucs
qucs:
qucs: Qucs is an integrated circuit simulator which means you are able to
qucs: setup a circuit with a graphical user interface (GUI) and simulate
qucs: the large-signal, small-signal and noise behaviour of the circuit.
qucs: After that simulation has finished you can view the simulation
qucs: results on a presentation page or window.
qucs:

PACKAGE NAME:  FSMDesigner4-4.2-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/FSMDesigner4/4.2
PACKAGE SIZE (compressed):  935 K
PACKAGE SIZE (uncompressed):  3000 K
PACKAGE REQUIRED:  curl >= 7.21.4-i486-1,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,cyrus-sasl >= 2.1.23-i486-1,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,icu >= 4.6.1-i486-1mp,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXrender >= 0.9.6-i486-1,libidn >= 1.19-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,openldap-client >= 2.4.23-i486-1,openssl >= 0.9.8r-i486-3 | openssl-solibs >= 0.9.8r-i486-3,python >= 2.6.6-i486-1,qt >= 4.7.0_7abde40-i486-3,util-linux >= 2.19-i486-1,xerces-c >= 3.1.1-i486-1mp,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
FSMDesigner4: FSMDesigner4
FSMDesigner4:
FSMDesigner4: FSMDesigner4 is a C++ based implementation for a Finite State
FSMDesigner4: Machine (FSM) design tool with integrated Hardware Description
FSMDesigner4: Language (HDL) generation. FSMDesigner4 uses the Simple-Moore FSM
FSMDesigner4: model. This guarantees an efficient design for fast complex control
FSMDesigner4: circuits.
FSMDesigner4:

PACKAGE NAME:  gcam-2010.07.27-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/gcam/20100727
PACKAGE SIZE (compressed):  270 K
PACKAGE SIZE (uncompressed):  1530 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,gtkglext >= 1.2.0-i486-1mp,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXmu >= 1.1.0-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXt >= 1.1.1-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gcam: GCAM
gcam:
gcam: GCAM is the free GNU Computer Aided Manufacturing package. Most
gcam: 3-Axis Computer Numerically Controlled (CNC) mills are supported in
gcam: both english and metric units. GCAM has a simple interface for making
gcam: bolt holes, drill holes, sketches, templates, and more. After
gcam: extruding these entities one can export the corresponding G-code for
gcam: the selected cutting tool(s). GCAM also imports RS274X (Gerber) and
gcam: Excellon drill files for gerber to G-code pcb milling conversion used
gcam: in circuit board prototyping.
gcam:

PACKAGE NAME:  geda-gaf-1.7.1-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/geda/devel/1.7.1
PACKAGE SIZE (compressed):  6172 K
PACKAGE SIZE (uncompressed):  17000 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gmp >= 5.0.1-i486-1,gtk+2 >= 2.24.4-i486-1,guile >= 1.8.8-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libstroke >= 0.5.1-i486-1mp,libtool >= 2.4-i486-1,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,perl >= 5.12.3-i486-1,pixman >= 0.20.2-i486-1,python >= 2.6.6-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
geda-gaf: gEDA
geda-gaf:
geda-gaf: The gEDA project has produced and continues working on a full GPL'd
geda-gaf: suite and toolkit of Electronic Design Automation tools. These tools
geda-gaf: are used for electrical circuit design, schematic capture, simulation,
geda-gaf: prototyping, and production. Currently, the gEDA project offers a
geda-gaf: mature suite of free software applications for electronics design,
geda-gaf: including schematic capture, attribute management, bill of materials
geda-gaf: (BOM) generation, netlisting into over 20 netlist formats, analog and
geda-gaf: digital simulation, and printed circuit board (PCB) layout.
geda-gaf:

PACKAGE NAME:  geda-gaf-1.6.2-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/geda/stable/1.6.2
PACKAGE SIZE (compressed):  3329 K
PACKAGE SIZE (uncompressed):  14060 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gmp >= 5.0.1-i486-1,gtk+2 >= 2.24.4-i486-1,guile >= 1.8.8-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libstroke >= 0.5.1-i486-1mp,libtool >= 2.4-i486-1,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,perl >= 5.12.3-i486-1,pixman >= 0.20.2-i486-1,python >= 2.6.6-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
geda-gaf: gEDA
geda-gaf:
geda-gaf: The gEDA project has produced and continues working on a full GPL'd
geda-gaf: suite and toolkit of Electronic Design Automation tools. These tools
geda-gaf: are used for electrical circuit design, schematic capture, simulation,
geda-gaf: prototyping, and production. Currently, the gEDA project offers a
geda-gaf: mature suite of free software applications for electronics design,
geda-gaf: including schematic capture, attribute management, bill of materials
geda-gaf: (BOM) generation, netlisting into over 20 netlist formats, analog and
geda-gaf: digital simulation, and printed circuit board (PCB) layout.
geda-gaf:

PACKAGE NAME:  kicad-20111224devel-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/kicad/devel-20111224-r3325
PACKAGE SIZE (compressed):  125438 K
PACKAGE SIZE (uncompressed):  550650 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.3a-i486-1mp,libpng >= 1.4.8-i486-1_slack13.37,libtiff >= 3.9.4-i486-2,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,util-linux >= 2.19-i486-1,wxWidgets >= 2.8.12-i486-1mp,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kicad: KiCAD
kicad:
kicad: Kicad is an open source (GPL) software for the creation of electronic
kicad: schematic diagrams and printed circuit board artwork.
kicad:

PACKAGE NAME:  kicad-20110429stable-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/kicad/stable-20110429-r2986
PACKAGE SIZE (compressed):  124982 K
PACKAGE SIZE (uncompressed):  548870 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.3a-i486-1mp,libpng >= 1.4.8-i486-1_slack13.37,libtiff >= 3.9.4-i486-2,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,util-linux >= 2.19-i486-1,wxWidgets >= 2.8.12-i486-1mp,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
kicad: KiCAD
kicad:
kicad: Kicad is an open source (GPL) software for the creation of electronic
kicad: schematic diagrams and printed circuit board artwork.
kicad:

PACKAGE NAME:  pcb-20100929-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/pcb/20100929
PACKAGE SIZE (compressed):  2687 K
PACKAGE SIZE (uncompressed):  16420 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,dbus >= 1.4.1-i486-1,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gd >= 2.0.35-i486-4,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXpm >= 3.5.9-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libjpeg >= v8a-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pcb: PCB
pcb:
pcb: PCB is an interactive printed circuit board editor for the X11 window
pcb: system. PCB includes a rats nest feature, design rule checking, and
pcb: can provide industry standard RS-274-X (Gerber), NC drill, and
pcb: centroid data (X-Y data) output for use in the board fabrication and
pcb: assembly process. PCB offers high end features such as an autorouter
pcb: and trace optimizer which can tremendously reduce layout time.
pcb:

PACKAGE NAME:  qfsm-0.52.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/qfsm/0.52
PACKAGE SIZE (compressed):  1057 K
PACKAGE SIZE (uncompressed):  4590 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,qt >= 4.7.0_7abde40-i486-3,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
qfsm: Qfsm
qfsm:
qfsm: Qfsm is a graphical editor for finite state machines written in C++
qfsm: using Qt the graphical Toolkit from Trolltech. Finite state machines
qfsm: are a model to describe complex objects or systems in terms of the
qfsm: states they may be in. In practice they can used to design integrated
qfsm: circuits or to create regular expressions, scanners or other program
qfsm: code.
qfsm:

PACKAGE NAME:  xcircuit-3.8.21-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/xcircuit/devel/3.8.21
PACKAGE SIZE (compressed):  484 K
PACKAGE SIZE (uncompressed):  2460 K
PACKAGE REQUIRED:  bzip2 >= 1.0.6-i486-1,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.8-i486-1_slack13.37,glibc-solibs >= 2.13-i486-5_slack13.37,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXScrnSaver >= 1.2.1-i486-1,libXau >= 1.0.6-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXft >= 2.2.0-i486-1,libXpm >= 3.5.9-i486-1,libXrender >= 0.9.6-i486-1,libXt >= 1.1.1-i486-1,libxcb >= 1.7-i486-1,ngspice >= 24-i486-1mp,tcl >= 8.5.9-i486-1,tk >= 8.5.9-i486-1,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcircuit: XCircuit
xcircuit:
xcircuit: XCircuit is a UNIX/X11 program for drawing publishable-quality 
xcircuit: electrical circuit schematic diagrams and related figures, and
xcircuit: produce circuit netlists through schematic capture. XCircuit regards 
xcircuit: circuits as inherently hierarchical, and writes both hierarchical 
xcircuit: PostScript output and hierarchical SPICE netlists. Circuit components
xcircuit: are saved in and retrieved from libraries which are fully editable.
xcircuit: XCircuit does not separate artistic expression from circuit drawing;
xcircuit: it maintains flexiblity in style without compromising the power of
xcircuit: schematic capture.

PACKAGE NAME:  xcircuit-3.7.39-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/T-CAD-CAM-EDA/xcircuit/stable/3.7.39
PACKAGE SIZE (compressed):  483 K
PACKAGE SIZE (uncompressed):  2450 K
PACKAGE REQUIRED:  bzip2 >= 1.0.6-i486-1,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.8-i486-1_slack13.37,glibc-solibs >= 2.13-i486-5_slack13.37,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXScrnSaver >= 1.2.1-i486-1,libXau >= 1.0.6-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXft >= 2.2.0-i486-1,libXpm >= 3.5.9-i486-1,libXrender >= 0.9.6-i486-1,libXt >= 1.1.1-i486-1,libxcb >= 1.7-i486-1,ngspice >= 24-i486-1mp,tcl >= 8.5.9-i486-1,tk >= 8.5.9-i486-1,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xcircuit: XCircuit
xcircuit:
xcircuit: XCircuit is a UNIX/X11 program for drawing publishable-quality 
xcircuit: electrical circuit schematic diagrams and related figures, and
xcircuit: produce circuit netlists through schematic capture. XCircuit regards 
xcircuit: circuits as inherently hierarchical, and writes both hierarchical 
xcircuit: PostScript output and hierarchical SPICE netlists. Circuit components
xcircuit: are saved in and retrieved from libraries which are fully editable.
xcircuit: XCircuit does not separate artistic expression from circuit drawing;
xcircuit: it maintains flexiblity in style without compromising the power of
xcircuit: schematic capture.

PACKAGE NAME:  cpik-0.5.2.1-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/cpik/0.5.2.1
PACKAGE SIZE (compressed):  2056 K
PACKAGE SIZE (uncompressed):  5900 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cpik: CPIK
cpik:
cpik: CPIK (the C compiler for PIC18 devices) is now released under GPL
cpik: licence. CPIK V0.5.x is an easy to use, near ANSI C compiler which is
cpik: fully integrated with PikDev. This project is still in progress but
cpik: the current version is perfectly usable (from Pikdev or from
cpik: command-line interpreter).
cpik:

PACKAGE NAME:  flashrom-0.9.4-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/flashrom/0.9.4
PACKAGE SIZE (compressed):  232 K
PACKAGE SIZE (uncompressed):  1070 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4,libftdi >= 0.19-i486-1mp,libusb >= 1.0.8-i486-2,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
flashrom: FlashROM
flashrom:
flashrom: Flashrom is a utility for identifying, reading, writing, verifying
flashrom: and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/
flashrom: firmware images. 
flashrom:

PACKAGE NAME:  ftdi_eeprom-0.3-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/ftdi_eeprom/0.3
PACKAGE SIZE (compressed):  13 K
PACKAGE SIZE (uncompressed):  50 K
PACKAGE REQUIRED:  confuse >= 2.7-i486-1mp,glibc-solibs >= 2.13-i486-4,libftdi >= 0.19-i486-1mp,libusb >= 1.0.8-i486-2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ftdi_eeprom: FTDI_EEPROM
ftdi_eeprom:
ftdi_eeprom: Utility to write the EEPROM connected to a FTDI USB-chip
ftdi_eeprom:

PACKAGE NAME:  gputils-0.14.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/gputils/0.14.0
PACKAGE SIZE (compressed):  585 K
PACKAGE SIZE (uncompressed):  18640 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gputils: GPUtils
gputils:
gputils: GPUTILS is a collection of tools for the Microchip(TM) PIC
gputils: microcontrollers. It includes gpasm, gplink, and gplib. It's
gputils: distributed under the terms of the GNU Public License.
gputils:

PACKAGE NAME:  k8061utils-1.1.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/k8061utils/1.1.0
PACKAGE SIZE (compressed):  100 K
PACKAGE SIZE (uncompressed):  370 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,libusb >= 1.0.8-i486-2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
k8061utils: K8061 utils
k8061utils:
k8061utils: K8061 utilities provide multi purpose control of up to 8 k8061 USB
k8061utils: interface boards including k8061d (daemon), k8061m (memory client),
k8061utils: and k8061s (socket client). It is licensed under the GNU GPL V.3.
k8061utils:
k8061utils: REMEMBER: after installation type "usermod -aG k8061 <user>" then
k8061utils:            logout and login user
k8061utils:
            

PACKAGE NAME:  lxi-control-1.0.1-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/lxi-control/1.0.1
PACKAGE SIZE (compressed):  16 K
PACKAGE SIZE (uncompressed):  80 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lxi-control: LXI-control
lxi-control:
lxi-control: The lxi-control application is a command line utility for remote
lxi-control: controlling LXI enabled devices. Typical devices include instruments
lxi-control: such as power supplies, oscilloscopes, digital multimeters, signal
lxi-control: generators, etc.. The devices are controlled by sending SCPI commands
lxi-control: via LAN IP network to the devices. LXI is the successor to GPIB.
lxi-control:

PACKAGE NAME:  op-0.7.9-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/openprogrammer/op/0.7.9
PACKAGE SIZE (compressed):  90 K
PACKAGE SIZE (uncompressed):  360 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
op: OpenProgrammer
op:
op: OP is a command-line executable; the Windows version doesn't need
op: installation; the Linux version uses device /dev/usb/hiddev0 (or the
op: one specified as parameter) and needs reading rights for it e.g.:
op:
op: sudo chmod a+r /dev/usb/hiddev0
op:

PACKAGE NAME:  opgui-0.7.9-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/openprogrammer/opgui/0.7.9
PACKAGE SIZE (compressed):  93 K
PACKAGE SIZE (uncompressed):  370 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
opgui: opgui - OpenProgrammerGUI
opgui:
opgui: opgui is a control program for open programmer, an USB programmer for
opgui: PIC and ATMEL micros, I2C/SPI/MicroWire memories, and other I2C/SPI
opgui: devices.
opgui:

PACKAGE NAME:  pdb-0.1-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/openprogrammer/pdb/0.1
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  70 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pdb: pdb - PIC debugger
pdb:
pdb: Pdb is an ICD (In-Circuit Debugger) for PIC16 microcontrollers.
pdb:

PACKAGE NAME:  pk2-la-1.1-noarch-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/pickit2la/1.1
PACKAGE SIZE (compressed):  20 K
PACKAGE SIZE (uncompressed):  90 K
PACKAGE REQUIRED:  pygtk >= 2.22.0-i486-1,pyusb >= 1.0.0a1-noarch-1mp
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pk2-la: PK2-la
pk2-la:
pk2-la: The Microchip PICkit 2 has the ability to act as a logic analyzer
pk2-la: and I/O probe. This project provides a reverse engineered libusb 
pk2-la: user space device driver and GUI to provide this functionality for
pk2-la: users of unsupported operating systems.
pk2-la:

PACKAGE NAME:  pk2aux-1.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/pk2aux/1.0
PACKAGE SIZE (compressed):  26 K
PACKAGE SIZE (uncompressed):  130 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4,libusb >= 1.0.8-i486-2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pk2aux: PK2Aux
pk2aux:
pk2aux: PK2Aux is a library and suite of command-line utilities for using
pk2aux: the Microchip PICkit2 programmer device for purposes other than
pk2aux: programming (such as the generic pin controls, serial UART, and
pk2aux: logic analyzer).
pk2aux:

PACKAGE NAME:  pk2cmd-1.20-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/pk2cmd/1.20
PACKAGE SIZE (compressed):  108 K
PACKAGE SIZE (uncompressed):  570 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,libusb >= 1.0.8-i486-2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pk2cmd: PK2CMD
pk2cmd:
pk2cmd: PICkit 2 Command Line Interface (PK2CMD) is a 32-bit command-line
pk2cmd: interface to the PICkit 2 device programmer.
pk2cmd:

PACKAGE NAME:  sdcc-6544-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/sdcc/devel-r6544
PACKAGE SIZE (compressed):  3649 K
PACKAGE SIZE (uncompressed):  85040 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,latex2html >= 2008-i486-1mp,libtermcap >= 1.2.3-i486-7,lyx >= 1.6.9-i486-1mp,readline >= 5.2-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sdcc: SDCC
sdcc:
sdcc: SDCC is a retargettable, optimizing ANSI - C compiler that targets
sdcc: the Intel 8051, Maxim 80DS390, Zilog Z80 and the Motorola 68HC08
sdcc: based MCUs. Work is in progress on supporting the Microchip PIC16
sdcc: and PIC18 series. SDCC is Free Open Source Software, distributed
sdcc: under GNU General Public License (GPL).
sdcc:

PACKAGE NAME:  sdcc-3.0.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/sdcc/stable-3.0.0
PACKAGE SIZE (compressed):  3643 K
PACKAGE SIZE (uncompressed):  84970 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,gputils >= 0.13.7-i486-1mp,latex2html >= 2008-i486-1mp,libtermcap >= 1.2.3-i486-7,lyx >= 1.6.9-i486-1mp,readline >= 5.2-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
sdcc: SDCC
sdcc:
sdcc: SDCC is a retargettable, optimizing ANSI - C compiler that targets
sdcc: the Intel 8051, Maxim 80DS390, Zilog Z80 and the Motorola 68HC08
sdcc: based MCUs. Work is in progress on supporting the Microchip PIC16
sdcc: and PIC18 series. SDCC is Free Open Source Software, distributed
sdcc: under GNU General Public License (GPL).
sdcc:

PACKAGE NAME:  serial-io-1.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/serial-io/1.0
PACKAGE SIZE (compressed):  130 K
PACKAGE SIZE (uncompressed):  480 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libserial >= 0.6.0rc1-i486-1mp,libxcb >= 1.7-i486-1,qt >= 4.7.0_7abde40-i486-3,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
serial-io: Serial-IO
serial-io:
serial-io: Serial-IO-Manager is a simple program to send and receive data from
serial-io: a serial interface. The GUI is designed like a chat window with a
serial-io: transmitter/receiver textfield and a command line to send char and
serial-io: integer values.
serial-io:

PACKAGE NAME:  wxMaxima-11.08.0-i486-1mp.txz 
PACKAGE LOCATION:  ./Categories/Utilities/wxMaxima/11.08.0
PACKAGE SIZE (compressed):  534 K
PACKAGE SIZE (uncompressed):  2210 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXxf86vm >= 1.1.1-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.3a-i486-1mp,libpng >= 1.4.8-i486-1_slack13.37,libtiff >= 3.9.4-i486-2,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,util-linux >= 2.19-i486-1,wxWidgets >= 2.8.12-i486-1mp,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wxMaxima: WxMaxima
wxMaxima:
wxMaxima: wxMaxima is a graphical user interface for the computer algebra system
wxMaxima: Maxima. It eases the use of Maxima by making most of its commands
wxMaxima: available through a menu system and by providing input dialogs for
wxMaxima: commands that require more than one argument. It also implements its
wxMaxima: own display engine that outputs mathematical symbols directly instead
wxMaxima: of depicting them with ASCII characters. wxMaxima also features 2D and
wxMaxima: 3D inline plots, simple animations, mixing of text and mathematical
wxMaxima: calculations to create documents, exporting of input and output to TeX.
wxMaxima:

PACKAGE NAME:  automake-1.9.6-noarch-1mp.txz 
PACKAGE LOCATION:  ./development/automake/1.9.6
PACKAGE SIZE (compressed):  402 K
PACKAGE SIZE (uncompressed):  1390 K
PACKAGE REQUIRED:  perl >= 5.12.3-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
automake: automake (a Makefile generator)
automake:
automake: This is Automake, a Makefile generator.  It was inspired by the 4.4BSD
automake: make and include files, but aims to be portable and to conform to the
automake: GNU standards for Makefile variables and targets.  Automake is a Perl
automake: script.  The input files are called Makefile.am.  The output files are
automake: called Makefile.in; they are intended for use with Autoconf.  Automake
automake: requires certain things to be done in your configure.in.  You must
automake: install the "m4" and "perl" packages to be able to use automake.
automake:

PACKAGE NAME:  cppunit-1.12.1-i486-1mp.txz 
PACKAGE LOCATION:  ./development/cppunit/1.12.1
PACKAGE SIZE (compressed):  456 K
PACKAGE SIZE (uncompressed):  5050 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
cppunit: cppunit
cppunit: 
cppunit: CppUnit is a C++ unit testing framework. 
cppunit: It started its life as a port of JUnit to C++ by Michael Feathers.
cppunit:
cppunit: 
cppunit:

PACKAGE NAME:  lua-5.1.4.3-i486-1mp.txz 
PACKAGE LOCATION:  ./development/lua/5.1.4.3
PACKAGE SIZE (compressed):  182 K
PACKAGE SIZE (uncompressed):  980 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4,ncurses >= 5.9-i486-1,readline >= 5.2-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
lua: Lua - A powerful, fast, lightweight, embeddable scripting language.
lua:
lua: Lua combines simple procedural syntax with powerful data description
lua: constructs based on associative arrays and extensible semantics.
lua: Lua is dynamically typed, runs by interpreting bytecode for a
lua: register-based virtual machine, and has automatic memory management
lua: with incremental garbage collection, making it ideal for
lua: configuration, scripting, and rapid prototyping.
lua:

PACKAGE NAME:  qt3-3.3.8b-i486-1mp.txz 
PACKAGE LOCATION:  ./development/qt/3.3.8b
PACKAGE SIZE (compressed):  10793 K
PACKAGE SIZE (uncompressed):  47530 K
PACKAGE REQUIRED:  coreutils >= 8.11-i486-1,cups >= 1.4.6-i486-1,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,lcms >= 1.19-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXft >= 2.2.0-i486-1,libXinerama >= 1.1.1-i486-1,libXmu >= 1.1.0-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXt >= 1.1.1-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libjpeg >= v8a-i486-1,libmng >= 1.0.10-i486-2,libpng >= 1.4.8-i486-1_slack13.37,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,mysql >= 5.1.56-i486-1,openssl >= 0.9.8r-i486-3 | openssl-solibs >= 0.9.8r-i486-3,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
qt3: Qt3 (a multi-platform C++ graphical user interface toolkit, version 3)
qt3:
qt3: Qt is a complete and well-developed object-oriented framework for
qt3: developing graphical user interface (GUI) applications using C++.
qt3:
qt3: This release is free only for development of free software for the X
qt3: Window System.  If you use Qt for developing commercial or other
qt3: non-free software, you must have a professional license.  Please see
qt3: http://qt.nokia.com/products/licensing for details on the licensing
qt3: information.
qt3:

PACKAGE NAME:  wxWidgets-2.9.2-i486-1mp.txz 
PACKAGE LOCATION:  ./development/wxWidgets/devel/2.9.2
PACKAGE SIZE (compressed):  7583 K
PACKAGE SIZE (uncompressed):  28940 K
PACKAGE REQUIRED:  GConf >= 2.32.3-i486-1mp,ORBit2 >= 2.14.19-i486-1mp,atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cppunit >= 1.12.1-i486-1mp,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gst-plugins-base >= 0.10.32-i486-1,gstreamer >= 0.10.32-i486-1,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.3a-i486-1mp,libpng >= 1.4.5-i486-1,libtiff >= 3.9.4-i486-2,libxcb >= 1.7-i486-1,libxml2 >= 2.7.8-i486-3,mesa >= 7.9.2-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,sdl >= 1.2.14-i486-5,svgalib >= 1.9.25-i486-2,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wxWidgets: wxWidgets
wxWidgets:
wxWidgets: wxWidgets is a C++ library that lets developers create applications
wxWidgets: for Windows, OS X, Linux and UNIX on 32-bit and 64-bit architectures
wxWidgets: as well as several mobile platforms including Windows Mobile, iPhone 
wxWidgets: SDK and embedded GTK+. It has popular language bindings for Python,
wxWidgets: Perl, Ruby  and many other languages. Unlike other cross-platform
wxWidgets: toolkits, wxWidgets gives its applications a truly native look and
wxWidgets: feel because it uses the platform's native API rather than emulating
wxWidgets: the GUI. It's also extensive, free, open-source and mature.
wxWidgets:

PACKAGE NAME:  wxWidgets-2.8.12-i486-1mp.txz 
PACKAGE LOCATION:  ./development/wxWidgets/stable/2.8.12
PACKAGE SIZE (compressed):  4209 K
PACKAGE SIZE (uncompressed):  22300 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cppunit >= 1.12.1-i486-1mp,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libjpeg >= v8a-i486-1,libmspack >= 0.3a-i486-1mp,libpng >= 1.4.5-i486-1,libtiff >= 3.9.4-i486-2,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,sdl >= 1.2.14-i486-5,svgalib >= 1.9.25-i486-2,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
wxWidgets: wxWidgets
wxWidgets:
wxWidgets: wxWidgets is a C++ library that lets developers create applications
wxWidgets: for Windows, OS X, Linux and UNIX on 32-bit and 64-bit architectures
wxWidgets: as well as several mobile platforms including Windows Mobile, iPhone 
wxWidgets: SDK and embedded GTK+. It has popular language bindings for Python,
wxWidgets: Perl, Ruby  and many other languages. Unlike other cross-platform
wxWidgets: toolkits, wxWidgets gives its applications a truly native look and
wxWidgets: feel because it uses the platform's native API rather than emulating
wxWidgets: the GUI. It's also extensive, free, open-source and mature.
wxWidgets:

PACKAGE NAME:  GConf-2.32.3-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/GConf/2.32.3
PACKAGE SIZE (compressed):  1025 K
PACKAGE SIZE (uncompressed):  8080 K
PACKAGE REQUIRED:  ORBit2 >= 2.14.19-i486-1mp,atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,cyrus-sasl >= 2.1.23-i486-1,dbus >= 1.4.1-i486-1,dbus-glib >= 0.88-i486-1,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,libxml2 >= 2.7.8-i486-3,openldap-client >= 2.4.23-i486-1,openssl >= 0.9.8r-i486-3 | openssl-solibs >= 0.9.8r-i486-3,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,python >= 2.6.6-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
GConf: GConf
GConf:
GConf: GConf is a system for storing application preferences. It is intended
GConf: for user preferences; not configuration of something like Apache, or
GConf: arbitrary data storage.
GConf:

PACKAGE NAME:  ORBit2-2.14.19-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/ORBit2/2.14.19
PACKAGE SIZE (compressed):  391 K
PACKAGE SIZE (uncompressed):  2770 K
PACKAGE REQUIRED:  glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,libidl >= 0.8.14-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
ORBit2: ORBit2
ORBit2:
ORBit2: ORBit2 is a CORBA 2.4-compliant Object Request Broker (ORB) featuring
ORBit2: mature C, C++ and Python bindings
ORBit2:

PACKAGE NAME:  confuse-2.7-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/confuse/2.7
PACKAGE SIZE (compressed):  85 K
PACKAGE SIZE (uncompressed):  620 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
confuse: libConfuse
confuse:
confuse: libConfuse is a configuration file parser library, licensed under the
confuse: terms of the ISC license, and written in C. It supports sections and
confuse: (lists of) values (strings, integers, floats, booleans or other
confuse: sections), as well as some other features (such as single/double-quoted
confuse: strings, environment variable expansion, functions and nested include
confuse: statements). It makes it very easy to add configuration file capability
confuse: to a program using a simple API.
confuse:

PACKAGE NAME:  epydoc-3.0.1-noarch-1mp.txz 
PACKAGE LOCATION:  ./libraries/epydoc/3.0.1
PACKAGE SIZE (compressed):  1165 K
PACKAGE SIZE (uncompressed):  16140 K
PACKAGE REQUIRED:  python >= 2.6.6-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
epydoc: Epydoc - Automatic API Documentation Generation for Python
epydoc:
epydoc: Epydoc is a tool for generating API documentation for Python modules,
epydoc: based on their docstrings. For an example of epydoc's output, see the
epydoc: API documentation for epydoc itself (html, pdf). A lightweight markup
epydoc: language called epytext can be used to format docstrings, and to add
epydoc: information about specific fields, such as parameters and instance
epydoc: variables. Epydoc also understands docstrings written in
epydoc: reStructuredText, Javadoc, and plaintext. For a more extensive example
epydoc: of epydoc's output, see the API documentation for Python 2.5.
epydoc:

PACKAGE NAME:  gtk+extra-2.1.2cvs-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/gtk+extra/2.1.2cvs
PACKAGE SIZE (compressed):  547 K
PACKAGE SIZE (uncompressed):  4160 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.8-i486-1_slack13.37,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtk+extra: Gtk+Extra
gtk+extra:
gtk+extra: GtkExtra is a useful set of widgets for creating GUI's for the
gtk+extra: Xwindows system using GTK+. You can use it complementary to GTK+ and
gtk+extra: it is written in C. It is also Free Software and released under the
gtk+extra: LGPL license.
gtk+extra:

PACKAGE NAME:  gtkglext-1.2.0-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/gtkglext/1.2.0
PACKAGE SIZE (compressed):  230 K
PACKAGE SIZE (uncompressed):  2250 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libICE >= 1.0.7-i486-1,libSM >= 1.2.0-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXmu >= 1.1.0-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libXt >= 1.1.1-i486-1,libXxf86vm >= 1.1.1-i486-1,libdrm >= 2.4.23-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,mesa >= 7.9.2-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,util-linux >= 2.19-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtkglext: GtkGLext
gtkglext:
gtkglext: GtkGLExt is an OpenGL extension to GTK+. It provides additional GDK
gtkglext: objects which support OpenGL rendering in GTK+ and GtkWidget API
gtkglext: add-ons to make GTK+ widgets OpenGL-capable. In contrast to Janne
gtkglext: Löf's GtkGLArea, GtkGLExt provides a GtkWidget API that enables
gtkglext: OpenGL drawing for standard and custom GTK+ widgets.
gtkglext:

PACKAGE NAME:  gtksourceview-2.11.2-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/gtksourceview/2.11.2
PACKAGE SIZE (compressed):  800 K
PACKAGE SIZE (uncompressed):  5790 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,libxml2 >= 2.7.8-i486-3,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
gtksourceview: GtkSourceView
gtksourceview:
gtksourceview: GtkSourceView is a portable C library that extends the standard GTK+
gtksourceview: framework for multiline text editing  with support for configurable
gtksourceview: syntax highlighting, unlimited undo/redo, UTF-8 compliant caseless
gtksourceview: searching, printing and other features  typical of a source code
gtksourceview: editor.
gtksourceview:

PACKAGE NAME:  icu-4.6.1-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/icu/4.6.1
PACKAGE SIZE (compressed):  8324 K
PACKAGE SIZE (uncompressed):  43120 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
icu: icu -
icu:
icu: ICU is a mature, widely used set of C/C++ and Java libraries providing
icu: Unicode and Globalization support for software applications. ICU is
icu: widely portable and gives applications the same results on all
icu: platforms and between C/C++ and Java software.
icu:

PACKAGE NAME:  judy-1.0.5-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/judy/1.0.5
PACKAGE SIZE (compressed):  158 K
PACKAGE SIZE (uncompressed):  840 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
judy: Judy
judy:
judy: Judy is a C library that provides a state-of-the-art core technology
judy: that implements a sparse dynamic array. Judy arrays are declared
judy: simply with a null pointer. A Judy array consumes memory only when it
judy: is populated, yet can grow to take advantage of all available memory
judy: if desired. Judy's key benefits are scalability, high performance, and
judy: memory efficiency. A Judy array is extensible and can scale up to a
judy: very large number of elements, bounded only by machine memory.
judy:

PACKAGE NAME:  latex2html-2008-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/latex2html/2008
PACKAGE SIZE (compressed):  696 K
PACKAGE SIZE (uncompressed):  5930 K
PACKAGE REQUIRED:  perl >= 5.12.3-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
latex2html: LaTeX2HTML
latex2html:
latex2html: A Perl program that translates LaTeX into HTML (HyperText Markup
latex2html: Language), optionally creating separate HTML files corresponding to
latex2html: each unit (e.g., section) of the document. LaTeX2HTML proceeds by
latex2html: interpreting LaTeX (to the best of its abilities).  It contains
latex2html: definitions from a wide variety of classes and packages, and users
latex2html: may add further definitions by writing Perl scripts that provide
latex2html: information about class/package commands.
latex2html:

PACKAGE NAME:  libftdi-0.19-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/libftdi/0.19
PACKAGE SIZE (compressed):  182 K
PACKAGE SIZE (uncompressed):  1810 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,libusb >= 1.0.8-i486-2
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libftdi: LibFTDI
libftdi:
libftdi: A library to talk to FTDI chips: FT232BM/245BM, FT2232C/D and
libftdi: FT232/245R using libusb, including the popular bitbang mode. This
libftdi: library is linked with your program in userspace, no kernel driver
libftdi: required.
libftdi:

PACKAGE NAME:  libmspack-0.3a-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/libmspack/0.3a
PACKAGE SIZE (compressed):  149 K
PACKAGE SIZE (uncompressed):  1390 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libmspack: LibMSpack
libmspack: 
libmspack: The purpose of libmspack is to provide both compression and
libmspack: decompression of some loosely related file formats used by
libmspack: Microsoft. The intention is to support all of the following
libmspack: formats: COMPRESS.EXE (.??_), Microsoft Help (.HLP),
libmspack: Microsoft Cabinet (.CAB), HTML Help (.CHM), Microsoft eBook (.LIT).
libmspack:
libmspack: 
libmspack:

PACKAGE NAME:  libserial-0.6.0rc1-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/libserial/0.6.0rc1
PACKAGE SIZE (compressed):  92 K
PACKAGE SIZE (uncompressed):  330 K
PACKAGE REQUIRED:  cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libserial: Libserial
libserial:
libserial: LibSerial provides a collection of C++ classes that allow one to 
libserial: access serial ports on POSIX systems like standard C++ iostream 
libserial: objects. The SerialStream class represents the primary class that is
libserial: expected to be used by developers to access serial ports as iostream
libserial: objects. Additionally a SerialPort class is available to provide access
libserial: to serial ports without using the standard C++ iostream interface. This
libserial: is useful for embedded systems where a complete C++ STL may not be
libserial: available.
libserial:

PACKAGE NAME:  libstroke-0.5.1-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/libstroke/0.51
PACKAGE SIZE (compressed):  54 K
PACKAGE SIZE (uncompressed):  150 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libstroke: LibStroke - A stroke translation library
libstroke:
libstroke: LibStroke is a stroke translation library. Strokes are motions of
libstroke: the mouse that can be interpreted by a program as a command. Strokes
libstroke: are used extensively in CAD programs. I fell in love with them when I
libstroke: was using the CAD tools that use a stroke interface to select tools
libstroke: or perform actions. I wrote this library so that others can see how
libstroke: useful strokes can be and so that more programs take advantage of
libstroke: this extremely natural human-computer interface. 
libstroke:

PACKAGE NAME:  libunique-1.1.6-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/libunique/1.1.6
PACKAGE SIZE (compressed):  74 K
PACKAGE SIZE (uncompressed):  430 K
PACKAGE REQUIRED:  atk >= 1.32.0-i486-1,cairo >= 1.10.2-i486-2,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,dbus >= 1.4.1-i486-1,dbus-glib >= 0.88-i486-1,expat >= 2.0.1-i486-2,fontconfig >= 2.8.0-i486-1,freetype >= 2.4.4-i486-1,gcc >= 4.5.2-i486-2,gdk-pixbuf2 >= 2.23.3-i486-1,glib2 >= 2.28.6-i486-1,glibc-solibs >= 2.13-i486-4,gtk+2 >= 2.24.4-i486-1,libX11 >= 1.4.3-i486-2,libXau >= 1.0.6-i486-1,libXcomposite >= 0.4.3-i486-1,libXcursor >= 1.1.11-i486-1,libXdamage >= 1.1.3-i486-1,libXdmcp >= 1.1.0-i486-1,libXext >= 1.2.0-i486-1,libXfixes >= 5.0-i486-1,libXi >= 1.4.2-i486-1,libXinerama >= 1.1.1-i486-1,libXrandr >= 1.3.1-i486-1,libXrender >= 0.9.6-i486-1,libpng >= 1.4.5-i486-1,libxcb >= 1.7-i486-1,pango >= 1.28.4-i486-1,pixman >= 0.20.2-i486-1,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
libunique: LibUnique
libunique:
libunique: Unique is a library for writing single instance application. If you
libunique: launch a single instance application twice, the second instance will
libunique: either just quit or will send a message to the running instance.
libunique:

PACKAGE NAME:  narray-0.6.0.1-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/narray/0.6.0.1
PACKAGE SIZE (compressed):  161 K
PACKAGE SIZE (uncompressed):  590 K
PACKAGE REQUIRED:  glibc-solibs >= 2.13-i486-4,ruby >= 1.9.1_p431-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
narray: NArray - Numerical Ruby NArray
narray:
narray: NArray is an Numerical N-dimensional Array class. Supported element
narray: types are 1/2/4-byte Integer, single/double-precision Real/Complex,
narray: and Ruby Object. This extension library incorporates fast calculation
narray: and easy manipulation of large numerical arrays into the Ruby language.
narray: NArray has features similar to NumPy, but NArray has vector and matrix
narray: subclasses.
narray:

PACKAGE NAME:  pyusb-1.0.0a1-noarch-1mp.txz 
PACKAGE LOCATION:  ./libraries/pyusb/1.0.0a1
PACKAGE SIZE (compressed):  56 K
PACKAGE SIZE (uncompressed):  380 K
PACKAGE REQUIRED:  python >= 2.6.6-i486-1
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
pyusb: PyUSB
pyusb:
pyusb: PyUSB is a python library that aims to provide easy USB devices access.
pyusb:

PACKAGE NAME:  xerces-c-3.1.1-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/xerces-c/3.1.1
PACKAGE SIZE (compressed):  3483 K
PACKAGE SIZE (uncompressed):  34110 K
PACKAGE REQUIRED:  curl >= 7.21.4-i486-1,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,cyrus-sasl >= 2.1.23-i486-1,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,icu >= 4.6.1-i486-1mp,libidn >= 1.19-i486-1,openldap-client >= 2.4.23-i486-1,openssl >= 0.9.8r-i486-3 | openssl-solibs >= 0.9.8r-i486-3,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xerces-c: Xerces-C
xerces-c:
xerces-c: Xerces-C++ is a validating XML parser written in a portable subset
xerces-c: of C++. Xerces-C++ makes it easy to give your application the
xerces-c: ability to read and write XML data. A shared library is provided for
xerces-c: parsing, generating, manipulating, and validating XML documents
xerces-c: using the DOM, SAX, and SAX2 APIs. Xerces-C++ is faithful to the
xerces-c: XML 1.0 recommendation and many associated standards. The parser
xerces-c: provides high performance, modularity, and scalability.
xerces-c:

PACKAGE NAME:  xylib-0.8-i486-1mp.txz 
PACKAGE LOCATION:  ./libraries/xylib/0.8
PACKAGE SIZE (compressed):  246 K
PACKAGE SIZE (uncompressed):  1310 K
PACKAGE REQUIRED:  bzip2 >= 1.0.6-i486-1,cxxlibs >= 6.0.14-i486-1 | gcc-g++ >= 4.5.2-i486-2,gcc >= 4.5.2-i486-2,glibc-solibs >= 2.13-i486-4,zlib >= 1.2.5-i486-4
PACKAGE CONFLICTS:  
PACKAGE SUGGESTS:  
PACKAGE DESCRIPTION:
xylib: XYlib
xylib:
xylib: xylib is a portable C++ library for reading files that contain x-y
xylib: data from powder diffraction, spectroscopy or other experimental
xylib: methods. Supported formats in the file README in the archive
xylib: